what did you do to your micra today ?

I'll see if I can get on, grandparents are down for the weekend and it's my bros birthday tomorrow... Anyway back to WIDT.. Nothing but and planning on getting better tires on my 14" RSI alloys and respraying them (spending more time on it) then dive in there for more lows. Keep the RSI's or get star mags??? (Or both??)


LEEEEEAVVVEEE ITTTTT YEAHH!!!
 
I'll see if I can get on, grandparents are down for the weekend and it's my bros birthday tomorrow... Anyway back to WIDT.. Nothing but and planning on getting better tires on my 14" RSI alloys and respraying them (spending more time on it) then dive in there for more lows. Keep the RSI's or get star mags??? (Or both??)


LEEEEEAVVVEEE ITTTTT YEAHH!!!
Keep a set.... track wheels ;)
 
Plus winter wheels and snow sliding wheels ;) wouldn't want to put the star mags through that ****!


LEEEEEAVVVEEE ITTTTT YEAHH!!!
 
Discovered a leak into passenger footwell aswell, and its coming down from top not up so gonna gaffer tape the sunroof and see :L

Also, new wheels in a few months :D
Probably the front scuttle panel over the bottom of the windscreen dude, mine did the same thing but I don't have a sunroof
 
Probably the front scuttle panel over the bottom of the windscreen dude, mine did the same thing but I don't have a sunroof

these bits
127u.jpg
128.jpg
 
Epic lols were had. Most of the call floor just turned around to look at me as a laughed.

Literally made me burst out laughing...

Do this mean we start calling Frank the Doc?

If you're reading this Frank, please get delorean style doors on your car.
 
Whattttttt that's an enormous amount. My car has 90k, if It hasn't been changed since factory(96) could that be why my car feels down on power compared to my old 1.3?

@belly93 @h701micra
 
Terracleaned and serviced(except fuel filter), replaced plugs from old car. Slight increase in tyre dimensions 175/60r13 to 175/65r13, but given 4 new tyres that'll probably cancel each other out.

Me and @belly93 are gonna resolver the TB tomorrow to take that out of the equation too.

Basically guys, I'm trying to make it as perfect as possible before going for block/injectors/ga16 parts etc

Wanna see what BHP I can get from a fresh engine/gearbox and a decent exhaust system.

Oh, on that note, I've got a 421 into a cat into standard inter pipe to backbox. Would a janspeed interpipe (2.5") make any difference or will it be 70 quid wasted?
 
@JoeK11

Excuse the incompetence, how do I get the scuttle panel off? :L
Easier if you remove the bonnet.
Take off the wipers and undo the clips along the panel (theres a screw in one somewhere as well as pop in ones) and carefully prise the panel up and off.
Then re seal the clips etc as Polly illustrated and refit the panel then replace the clips, wipers and bonnet and let it seal.
 
Easier if you remove the bonnet.
Take off the wipers and undo the clips along the panel (theres a screw in one somewhere as well as pop in ones) and carefully prise the panel up and off.
Then re seal the clips etc as Polly illustrated and refit the panel then replace the clips, wipers and bonnet and let it seal.

ty mang :D
 
And I went and missed it :( but I did take Nigel and Hannah to see rush :). Want to drive race cars now!

such an awesome film. the thunderous sound of the engine and the sight during the start of a race excites the heart and face.
casting is superb, how close they look to the real ppl.
 
Installed the new pedal box, hooked up both master cylinders and bias bar. Then found out the dash adjuster was for a 3/8 bias bar instead of the 7/16 I have.

D'OH >.<
 
Back
Top