frank
Joined
Likes
4,545

Profile posts Latest activity Postings About

  • alrite frank thinking of doing a engine swap in my 1994 super s . not sure which engine to do . sr20et or b16 or k20 could you give me any advice of which would be best? thanks alot
    frank
    frank
    i never tried an engine swap mate, more into diesels nowadays tbh
    hei frank, for a quick question, does a pre facelift 1.3 clutch assembly fit an early non pre facelift 1.0 flywheel? manufacturing year is 1994, but i measured the clutch 160mm? werent non pre facelifts supposed to be 180mm? this is wierd. hoping for a quick reply since im leaving soon to buy a new assembly lol.
    frank
    frank
    the p/fl 1.0 is the only 160mm one mate
    Hi Frank, I have a post on the k11 general discussion forum in regards to my k11 cvt gearbox issue, however it hasn’t been moderated yet. Any chance that could be done. Could really do with the advice from guys that have good knowledge of micras :) cheers
    frank
    frank
    hi cameron, the mods are pretty quiet on here nowadays
    F
    FLORI
    hello
    i am flori i have nissan micra year 2003 k12
    BP234631993477
    my email is florianbejaj@gmail.com
    Hi frank ive just been reading your guide to ignition timming on the micra 1.0 i now understand that it needs to be on the 2nd to last white notch . (2nd closest to me stood at front? ) but do i have to set my timing strobe on 15.0 advance or 0.0 (its a digital one )

    Thanks tom
    frank
    frank
    you could try it on your blue distributor wire mate
    lexMeth
    lexMeth
    thanks frank, will check it out as soon as i can
    Hi Frank. I had 1.0 Micra auto. I put instead a 1.3 engine with manual gearbox. I kept the original 1.0 auto engine wiring and the car doesnt start with the 1.3 ECU but it does start with the original automatic 1.0 ECU.
    Should I change the entire engine wiring and put the 1.3 engine wiring?
    The car doesn't seem to run OK with 1.0 auto ECU and 1.3 engine
    Thanks.
    frank
    frank
    there are a few nats threads on here mate
    B
    bartolomeus
    I swear I've searched 1 hour in threads and didn't find the info I need. Perhaps I cannot see the forest because of the trees :(
    Hi Frank, I have put a 1.0 before 2000 K11 gearbox into my 1.3 engine, I also put 1.0 flywheel, clutch, pressure plate, gearbox linkage. The clutch was very good. I am experiencing clutch slip. Is it because of the more power of the 1.3 engine ?
    frank
    frank
    it should,nt be slipping mate, there must be a problem somewhere
    Hi Frank,
    I suspect a timing chain issue on my 04 k12 micra. Did you creat any threads on here that help with the replacing it or know of any.
    Thanks
    H
    frank
    frank
    Kenirobo (sp?) posted some info on here mate
    B
    BigHaych
    Thanks frank ive spoken to him
    Hi Frank,
    I am very interested in the steel wheels that I've been told you make. I mean the ones that look exactly like the standard steel wheels on K11's but are larger and more deep dished. Can you please give me more information about these wheels and how much for me to purchase a set, any help is greatly appreciated.
    Best Wishes,
    Ihtisham
    frank
    frank
    hi Itisham, i dont do them anymore i,m afraid
    Hi Guys I am new here. Please i need your help i Have Nissan Micra Model 2000 the engine rotate but not start. i checked and the fault code was E2 & E1 NATS FAULT
    Hi frank i have just bought a white 1.0l k11. What do you recommend for me to buy to mod this and make it look bad.
    Hello frank I have a problem just been changing my exhaust and have snapped the bolts where the exhaust joins to the manifold any advice please. Would a garage drill them out for me ?
    frank
    frank
    drilling them is a mission gazza, i usually weld a nut onto the stump, or else grind a slot into the side and flick the broken bit out
    Hello Frank. I have a 1.0 k11 from '94 and I want to put a 1.3 gearbox because I want to upgrade my clutch...put a bigger/better one. It will fit a '98 gearbox from a 1.3 engine? Or you can give an advice to upgrade my clutch with the 1.0 gearbox? Sorry for my English..I am from Romania. Thanks in advance.
    frank
    frank
    hi mate, you will need to fit a hybrid clutch to an early 1.0 g/box (search "hybrid" on here) or else the whole 1.3 shafts/mounts ets
    Hello Frank ,another question about cg10 to cg13 swap:
    I own a pre facelift k11 and I'm going to make the convertion keeping cg10 box.
    One point that I m not sure about,after reading the forum is about fuel consumption. ..should I 'll be ready for a significant increase?
    Thanks in advance! :)
    frank
    frank
    it wont make much difference mate
    P
    panos986765
    Thanks Frank. I'll start the work tomorrow then...
    Hey Frank, am new to this forum, how do i know which gearbox i have (RS5F41A or RS5F30A) ? there are no codes on the gearboxes. i recently bought a gearbox off a facelift k11 but am not sure if the gearbox came off of a 1.0 or 1.3. please help? Thanks in advance :)
    Hi Frank, I'm from the Netherlands and I have a 'black 1998 k11. I've bought corsa b coilover for it. I've do some research and (correct me if I'm wrong) the best way is to install them with the complete corsa b top mount (spacer, bearing, top mount and the piece that hold the top mount to screw it) right? And do you know where i can order them? Or do i have to get a complete corsa b strut. Thank you for any advice
    frank
    frank
    yes mine had the stock corsa top mounts with the 2 holes modded so that they fit the k11 turrets mate :)
    hello / I have 2003 k11 which has a problem with the lights / when the lights are all off when I brake the sidelights come on as well as the instrument panel / this happens as well when the engine is not running / thank you for any advice / william
    frank
    frank
    sounds like an earth or type wrong bulb problem mate, rear lights maybe ?
    I
    ICU
    I had the same issue on my k12 and it was a bulb not seated properly. Once seated resolved the issue. Check all bulbs
    Hi Frank, I an going racing in Oval track soon. I was told your the man to ask for advice for building 1 litre engines. Can you help me?
    HIYA

    I HOPE YOU CAN HELP ME AS WELL YOU DID WITH OTHERS. I JUST BOUGHT A NISSAN CAR FOR ME WIFE AND THE RADIO IS ASKING FOR A CODE WHICH I DO NOT HAVE, THE SERIAL NUMBER IS BP334936371919. THERE'S ANOTHER NUMBER AS WELL I.E. 7643349318I WOULD REALLY APPRECIATE FOR YOUR HELP.
    THANKS,
    BEN
    hi mate i got a k11 with some strange ignition leads i have been trying to order online but to no avail ......is their a specific tech name for them?
    thanks
    New to this just wondering I have a cg13 in a k10 for oval racing and at high Rev it goes into limp mode /safe mode and I have to use 3rd gear I have a 3.7 Nissan box don't know what's it out of I have the legs but the safe mode is making me change gear any help would be great
    it was a lot of work jordan, and i dont know what gains are to be had tbh, the burble ones are my favorite ones by far :)
    Hey there Frank, been looking at your ''another n/a project'' on au site.
    Thinking of trying to make my own modded standard mani like the one towards the end of page 2(the 4-1 type thing).
    Does it perform much different to the frankspeed mani and would it be worth the effort?
    Cheers
    Hi Frank,

    I was just checking out your site and wondered if I could ask for your help?

    I'm currently working on a project called Price Any Car to provide free used car guide values to the public and would love to get some feedback from Micra experts. Would it be possible to ask some of your more experienced members for some feedback on our used price guide: http://priceanycar.com/Nissan/Micra/ ?
    Hi mate I'm after one of your exhaust manifolds for my lads race car how much are they and when could you supply one thanks
    Hi Frank, I'm new to this forum and I'm interested in buying 4-2-1 manifold but seems like I cant find It anywhere on this forum which Is recent.

    Question is do you know where I could buy it like what company makes them or who on the forum can make me one for a decent price?

    Many Thanks, Seb!
    frank
    frank
    hi seb, i think janspeed and ashley are the only ones available mate
    Hi Frank! And thaks for all the helpfull Posts!
    Im about to buy a k12 micra 1.2 (have a k11 1,3) but I can not figure out if it is a 65 or 80 hp cr12de engine. i cannot finde anything by the late number or by the license plate.
    Do you now the difference ? hope you can help me!

    Best regards Emil
    frank
    frank
    dunno emil tbh, wiki list it at 90 hp
    D
    DUB
    hmm.. Thats messed up. Do you know if ther is a online registre for nissan cars? like with colourscems?
    Hey man, one of the old members, P Bobby (John), told me that you lightened his flywheel a while ago for his 1 litre? Was just wondering how much you'd do it for? Cheers :)
    frank
    frank
    £50 lightened and balanced aidan :)
    Frank, I bet this happens alot. But i need a few questions answered prior to a CG13 conversion. Any help you could give me would be great. Mainly about bits bolting on to my new 1300 from my original 1000.
    1. Will my original exhaust manifold fit?
    2. Are the throttle bodies the same?
    3. Can i use my gearbox? I have a s reg 1.0. Any help would be great
    hey frank, i am new here, due to be getting a k11 shortly, have a list of mods to carry out and was just wondering if you had any of your 'frankspeed' manifolds avaliable and if so what would you charge for one inc postage to wiltshire? cheers
    frank
    frank
    i dont have any at the mo DK, and they are £45 posted mate :)
    D
    Dinky DK
    Cool cool mate. Let me know when ya got some in stock n I will definitely buy one. Gunna build the cat back my self but dont have the skills to mod the mani myself or the cash for a jaspeed.
    hi mate do you know what resistor i need tp put in for replacement of my driver airbag as im changing my steering wheel :) cheers mate
    hi mate i noticed ur only about an hour from where i live (glos) maybe we ould meet up need abit of help with my engine :/ its hunting and the eml is on i hooked up a diagnostic to it and its saying it runs to lean :S aparently its a throttle bodie and the sensor thats nakered what do you think i heard your like a micra yoda :P
    frank
    frank
    the lambda and maf problems are pretty common on the coilpack models thomas, there are loads of threads on here :)
    thomas bridges
    thomas bridges
    Ok thanks alot mate :)
    2nd bit switch off and leave car and red led comes on. engine will just spin and not start without pressing the unlock butten first. I feel little vulnerable as it came with one fob and one key. Ive had a key cut but the fob is the issue. can i but a n old rover two button lucus fob from ebay and pregram it myself in some way.. Any help appreciated mich
    hiya really new to micra ownership bought one for my 17 yr old daughter. To the point. It has an immobiliser and no central locking. A little red light in front of the hand brke and waht looks like an old rover two button fob. anyhoe press unlock on the fob and the red led goes out and all ok to start car.
    hi frank, i like the look of Stani1029 wheels, did he get them from you ? if so where did you get them from and how much were they, thank you
    frank
    frank
    they,re stock wheels that we reversed boonann, they were £120 iirc :)
    boonann
    boonann
    thank you frank, do you know where i can get this done?
    frank
    frank
    they were diy done mate :)
    Hi frank, here's a quick question for you. Appreciate your help...
    Someone unknown wrecked my left rear door. My K11 is preface lift - 1994 model.
    So the question is: Will a rear left door from a face lift K11 fit my preface lift K11?
    Because from all the pics i have seen the doors look identical?!
    I can get the door at a good price, so please share your info with me

    Cheers,
    Alex
    frank
    frank
    i guess the door shell will be the same alex, you may have to shift some of the plastic captive nuts tho :)
    alexzaki
    alexzaki
    Thanks for the info mate! I knew your were the one i should contact :)

    After work i'll go and pick up the door from a scrape yard. I hope my interior (from my crashed door) will fit directly to the door from the face lift K11.

    Cheers mate and thanks alot!
    Alex
    alexzaki
    alexzaki
    Hey mate! Just here to inform you that i picked the car 2 days ago from the workshop. The new door shell from the facelift K11 fits perfectly.

    Also sorted out the rust problem in the right back arch. Car looks like new now :)

    Thanks mate for your info! It helped ;)

    Alex
    Hi Frank, i'm just building a new engine CGA block and pistons and a CG head. Any idea how much to skim off the head to get around 11.5 : 1 CR ?
    Cheers Steve
    frank
    frank
    there is a thread on here where we worked out the combustion chamber cc,s etc steve, try a search on "chamber" username frank :)
  • Loading…
  • Loading…
  • Loading…
Top