what did you do to your micra today ?

Skymera got this style so check in his blog. It's good looking on blue cars. And maybe gold too. Not sure about other colours. Post a pic when you done this job. :)
 
Wdid?

Finally did some photobucketingness!!!

Right, Firstly some photos from my two trips out along snake pass with Hannah, and again to meet ade.
Ade's dogging spot
Some of the amazing scenery :)
Nigel posing
The Micras :)
Some show and tell/ frown at the grubbyness

And my favourite Photo from the day :) :D (very happy with the attention instagram gave Nigel lol)



And now some other stuff...
One of the better shots from my last meet in Cambridge

And something from the other day... i saw this very nice car in town, and also discovered my car now has a fuel warning light :) nobody understood my excitement when it came on...
http://i1077.photobucket.com/albums/w472/JoeK11/IMAG0226_zpsaa24e3de.jpg
http://i1077.photobucket.com/albums/w472/JoeK11/IMAG0227_zps1d007061.jpg
(figured just link those as there's loads on here already)

And finally on to What i did to my Micra today :)
I fitted the new breather and air filters i got from Goldsr the other day :) and also fitted the proper inner covers for my wiggly wing mirrors instead of just plain ones that i cut holes in :)


shiny huh? :D

not so shiny but still... :)
Oh and fitted a new doorhandle! Which had been asking to be done for ages!!!

Got an original one this time not replacement oem copy rubbish :)

Aaand we're done :)
 
Played with vinyl instead of getting on and painting the wheels.

307051_10151660760825921_1239680535_n.jpg


6265_10151660767830921_2065399867_n.jpg


969276_10151660772675921_645942238_n.jpg


Japanese script translates as Sports Club, if Google is to be believed.
 
WDIDT?

Tried to clean the Axle. Here is the video.
Could not removed the ABS sensor and the brake (is called shoes or pads?). Don't know how clean does it have to be before painting it!

Is it clean enough to paint?

Can some one help me here please?
Has any one used Hammerite Kurust? Is it any good?
What other product or there for treating the rust and painting over it?

Regards
 
Belly93 said:
how you mean mount it on a plate in the wheel well?
Click to expand...

Well its alot of hassle to mount it the traditional way. Soo I had the idea of mounting on the underside of the wheel well. Either by welding a plate underneath to bolt it to. Or some large repair washers either side :) sorry for not making sense :oops:
 
h701micra said:
Well its alot of hassle to mount it the traditional way. Soo I had the idea of mounting on the underside of the wheel well. Either by welding a plate underneath to bolt it to. Or some large repair washers either side :) sorry for not making sense :oops:
Click to expand...
still dont get it lol only thing i can think of is likw this?
530389_10151276957389291_360034634_n_zpsdf4710e3.jpg
 
WDID?

I am already start to buying my own hobby mechanic tools now. (my first purchases are trolley jack and two axle stands so far.) I will hunt for more tools. :) ( There is my wanted list in my gx blog. check it out.;) )
 
roadstermatt said:
mot failure repair done

fitted front spoiler of a 6n polo saloon

k& n cone filter fitted (loving the noise under load)
Click to expand...
BRRRAAAAAAAAAPPPPPP!!! But if its directly on the throttlebody it may get super hot like mine did and be useless lol. Though im sure the square wheels i had on at the time didnt help.

What needed repairing?
 
MaxK11C said:
I want an air intake...
But it will be a huge addition to my insurance... Won't it?
Click to expand...
might make a difference if you tell them, not sure how much but as a new driver any mod will be punished (cause insurance are twats), most people wouldnt bother i think, they dont really do much except make noise. Tbh if you do crash and they say anything you could just say the old airbox cracked and this was a cheap fix
 
WDID ?
maybe sussed how to get these head gaskets to withstand more boost :) using these modern crimped steel gasket technique (here,s one of our later type kart ones, a fire ring and 2 oil/crankcase ports, perfect seal without the use of compound or sealer)

P5261076.JPG


and here,s the cut-out fire-rings from a CR gasket, on a CG gasket

P5261079.JPG


when torqued down the crimping has flattened out in the high clamping area,s (near the bolts) but has,nt flattened in the low clamping area,s (between the bores where they blow first)
 
frank said:
WDID ?
maybe sussed how to get these head gaskets to withstand more boost :) using these modern crimped steel gasket technique (here,s one of our later type kart ones, a fire ring and 2 oil/crankcase ports, perfect seal without the use of compound or sealer)

View attachment 23044

and here,s the cut-out fire-rings from a CR gasket, on a CG gasket

View attachment 23050

when torqued down the crimping has flattened out in the high clamping area,s (near the bolts) but has,nt flattened in the low clamping area,s (between the bores where they blow first)
Click to expand...

Soo what you saying frank? :confused:
 
frank said:
WDID ?
maybe sussed how to get these head gaskets to withstand more boost :) using these modern crimped steel gasket technique (here,s one of our later type kart ones, a fire ring and 2 oil/crankcase ports, perfect seal without the use of compound or sealer)

View attachment 23044

and here,s the cut-out fire-rings from a CR gasket, on a CG gasket

View attachment 23050

when torqued down the crimping has flattened out in the high clamping area,s (near the bolts) but has,nt flattened in the low clamping area,s (between the bores where they blow first)
Click to expand...
Frank do you ever just sit down and have a cup of tea.. Watch a bit of tv lol.. Rich.. I have tea but it always has rust, oil and gunk in it... Laying under the car.


Sent from my iPad using Tapatalk HD
 
JoeK11 said:
BRRRAAAAAAAAAPPPPPP!!! But if its directly on the throttlebody it may get super hot like mine did and be useless lol. Though im sure the square wheels i had on at the time didnt help.

What needed repairing?
Click to expand...
lower ball joint gaiter

im going to see if the fuel suffers greatly or not if it doesnt i look at some pipe work and move the filter
 
JoeK11 said:
might make a difference if you tell them, not sure how much but as a new driver any mod will be punished (cause insurance are twats), most people wouldnt bother i think, they dont really do much except make noise. Tbh if you do crash and they say anything you could just say the old airbox cracked and this was a cheap fix
Click to expand...


or i though it was standard i brought the car like it ;)
 

Similar threads

M
What Have You Done To Your Micra Today?
Replies
3
Views
1K
skymera
skymera
Andy5077
  • Sticky
What did you do to your Cabrio today!
Replies
29
Views
4K
Andy5077
Andy5077
odd_ball
Buying new Micra today - your opinions please...
Replies
11
Views
1K
karlj
karlj
M
what to do
Replies
3
Views
2K
r-reg-sr
r-reg-sr
micra.jas
What do you think to this idea?
Replies
12
Views
1K
Vesar
Vesar
Back
Top