Paul Smith
Site Supporter
What have people used as turbo oil returns and how they did it?
Curiosity
Curiosity
and a 15mm copper water fitting bolted into the sumpold stock heater hose personally
me paul ?Did it bolt from the inside or did you tap it in
you could use it for a topfeed turbo paul, you would have to re-route the crankcase breathing system a bit thoRandom q, is there anything wrong with using the oil breather pipe from the rocker to the block as an oil return for the turbo?
mine made contact after fitting a CGA3 crank paul ragged it round the block and it quietened down okWhen fitting them is there any concerns with the crank hitting the inner part or are you lining them up with the separations