Hi guys, I have a problem with standard engine mounts, they are very weak, how I can solve this problem?
Nismo ones are really stiffer?
Any DIY tip to makes them stronger ?
Nismo ones are really stiffer?
Any DIY tip to makes them stronger ?
Ah the PU sealant idea will solve that issue
Franks gave the link to more info
may as well bolt the engine to the chassis !Gunna look at nylon ones...
I have a nylon gearbox mountGunna look at nylon ones...
I bake mine low temp for an hour or so. Completely cured in and outtried PU sealant before but cos it cures via moisture/air from outside in, the outer surface cures afew mm but deep inside it's still squishy uncured
http://micra.org.uk/threads/pollymobiles-rebuild.35251/page-11#post-420499
Well you should know by now I'm a bit of an idiotmay as well bolt the engine to the chassis !
I bake mine low temp for an hour or so. Completely cured in and out
Put it in a biscuit tin and get the blowtorch on itah could've tried that but mom wouldn't be happy that in the takeaway shop. tried placing it on top of the combi boiler but wasn't enough.
good ideaPut it in a biscuit tin and get the blowtorch on it
Do u need to remove the mount from the car to fill it with sealant