View attachment 25357
The one of the right.. has 2 vacuum pipes coming out both go to the dizzy in one form or another after t'ing to a carb vac feed I swapped vac pipes one at a time when I changed em
The one next to that has 2 wires coming from it going to a black plug... this is the connected... its plugged into the water feed that goes through the matrix and carb I persume
The one on the far left is plugged straight into the top of the thetmostat. Again another water sensor... I have the old loom and the both plug in and avoid the carb but go to bigger plugs.. assuming fusebox
A second loom that fits I actually remember seeing.. it connects to both the above mentioned sensors and both go to the 6 pin plug... the carb plug...
On that plug is
1 wire autochoke
1 wire anti dieseling valve
2 wire idle up solenoid
2 wire accelerator pump solenoid
Questions
1: does the autochoke require a 12v feed? Just tested and it hasn't got one
2: will the idle up solenoid require a signal from a temp sensor? Or just power and earth?
3: the acceleraror pump varies according to temp... so im guessing signal from temp sensor? Or again power and earth?