Currently in discussions with a silicone hose manufacturer regarding their kits, basically since my engine bay is far from standard and I'll probably only end up using a small selection of the standard k11 kit they sell and the fact that I'll be doing a large order for all my intercooler and non standard pipework they have agreed to let me pick the hoses I do need and only sell me those. That's where I run into trouble, below is a picture of their k11 kit and I need help identifying the hoses. I have made a start but don't have a clue on some of them...
1. Rad Bottom Hose
2. Heater
3. Heater bypass on thermostat
4. TB to servo vac ??
5. Gearbox Breather
6. Breather maybe? (Rear left of valve cover to air box)
7.
8. Rad Top Hose
9. PCV breather pipe on front of engine
10. Heater
11.
1. Rad Bottom Hose
2. Heater
3. Heater bypass on thermostat
4. TB to servo vac ??
5. Gearbox Breather
6. Breather maybe? (Rear left of valve cover to air box)
7.
8. Rad Top Hose
9. PCV breather pipe on front of engine
10. Heater
11.
Last edited:
the back of the inlet 
