is there any guide ore some detailed instructions on how to torbo the micra k11? and what ecu and the mapping setings?
micra turbo guide??
- Thread starter AngryFridge
- Start date
There is not really a guide to turbo a Micra but depending on engine and cost of everything is never a ending, first timers will use a small turbo say t25 turbo with a flange to suit the Micra k11 Manifold cut and welded, if it's something low boost say 6psi to 8psi Max, u can keep stock map sensors, stock fuel pump, and maybe brakes, but this is really on low boost say 120 bhp depending on engine, many people use nistune to control the engine, fuel pump and timing to allow safe set up, u won't need a front incooler if u wana go low boost, but will need bigger injectors, stock clutch might be even ok, if u have a k11c coil pack engine then it's a Diffrent story
SirChris
Educated Bodger
Hello Mate, its not simple and I would advise googling guides on how to turbo a naturally aspirated car, regardless of the car being a micra, understand what is required then try and look in to successful builds and ask them for advice or just keep posting or searching the forum for your answers.
OP
OP
Thanks guys, i was thinking about torboing my 2000 mod k11 with a 1 litr engine, and i have orderd a nistune board
Is ur 2000 a coil pack ?
OP
OP
non coil pack, it hav a external coil
So guessing u can add dizzy cap on without using coil pack
