When I use the stalk to engage main beams - I get no beam on the drivers side! Normal headlights and sidelights are fine!
I've checked fuses
Replaced both bulbs
And the connectors were recently replaced and do not look melted at all!
I'll get a picture tommorow - it's too dark now!
Which of the three wires connecting to the bulb is the earth? Where would I check to see if there is an earthing problem?
I should also mention that when I put the indicator stalk to the second headlight position which should be dipped headlights - I get the high beam indication on my dash
Here is sidelights only - DASH INDICATION OFF
Dipped headlights - DASH INDICATION ON
Main High Beam - DASH INDICATION ON (Compared to the previous picture (Dipped), the Right got brighter and Left actually became more dim!
"Headlight flashing" position where you just push the stalk forward - DASH INDICATION ON
Here is the normal connector
Here is the abnormal side
On the Working Side, the High-Beam does seem brighter than just dipped on the same side - the picture does not do the lights justice for this!
On the non-working side, Dipped are actually BRIGHTER than high-beam!