ecu
- Thread starter robo j
- Start date
Nistune is a very good solution IMO, allows most of the features of an aftermarket ecu for much less with no wiring. Ed @ fusion Motorsport is the best to talk to.
If you've got a coilpack Micra these can map or chip your ECU.
http://www.tornadosystems.com/product/nissan-micra-k11-coil-pack-engine-ecu-upgrade/
If you have the pre coilpack ECU then a Nistune add-on daughter board is what most do.
I went a different route and built my own Megasquirt ms3x ECU, that can be used in any other cars too.
There are other standalone ECU's out there also, such as Omex. Depends how much you want to spend.
Sent from my Nexus 5X using Micra Sports Club mobile app
http://www.tornadosystems.com/product/nissan-micra-k11-coil-pack-engine-ecu-upgrade/
If you have the pre coilpack ECU then a Nistune add-on daughter board is what most do.
I went a different route and built my own Megasquirt ms3x ECU, that can be used in any other cars too.
There are other standalone ECU's out there also, such as Omex. Depends how much you want to spend.
Sent from my Nexus 5X using Micra Sports Club mobile app
When you fitted the Megasquirt how did you pick up the crank position? Can it be done through the distributor?
The crank sensor is on the gearbox on the coilpack. This connects directly to the Megasquirt. For sequential fueling and spark the cam sensor also requires connecting.
Sent from my Nexus 5X using Micra Sports Club mobile app
