CGA1 Head & CG13 Block

[Skinner_87]

Just checking if a facelift 1.0 head is put on a CG13 block thats just a straight swop to make a 1275 so long as the facelift flywheel is used as it has the sensor for the coilpacks?

Also 1.0 facelift shafts & CG13 shafts are the same as its only the preface that came with the smaller shafts & lights box?

 

[Enuo]

Just checking if a facelift 1.0 head is put on a CG13 block thats just a straight swop to make a 1275 so long as the facelift flywheel is used as it has the sensor for the coilpacks?

Also 1.0 facelift shafts & CG13 shafts are the same as its only the preface that came with the smaller shafts & lights box?

want 1.3 cams in that 1.0 head mind

 

[frank]

Just checking if a facelift 1.0 head is put on a CG13 block thats just a straight swop to make a 1275 so long as the facelift flywheel is used as it has the sensor for the coilpacks?

Also 1.0 facelift shafts & CG13 shafts are the same as its only the preface that came with the smaller shafts & lights box?

coilpack head paul ?
and yes

 

[Skinner_87]

coilpack head paul ?
and yes

Ta frank, yep coil pack head

 

[frank]

Ta frank, yep coil pack head

yes mate , drill and dowel the crank ?

 

[Skinner_87]

yes mate , drill and dowel the crank ?

Is that the clutch end Frank?

 

[frank]

Is that the clutch end Frank?

yeh, a 7th hole @ 12 o,clock iirc paul