Bought my silver 2001 k11 on 16/6/14

this is a thread and gonna be a build page for it, photos will be up shortly and will upload more as time passes with modifications, big plans for my small k11. but feel free to post photos of your micras as inspiration for me or ideas. all welcome. thanks guys, proud to finally become an owner of one.
 
heres a few of the interior and outside.
10337723_10152195716407379_7977083014282587691_n.jpg
10394481_10152195716587379_4620982528136054915_n.jpg
10394481_10152195716587379_4620982528136054915_n.jpg
10337723_10152195716407379_7977083014282587691_n.jpg
10337723_10152195716407379_7977083014282587691_n.jpg
10394481_10152195716587379_4620982528136054915_n.jpg
 
sorry about them posting twice, laptops on the blink, ive just finished the flyeyes, and spraying rear badge, took off the micra badge but need to remove residue/glue, note this is my first car so all this is first time work.
10380273_10152195715987379_8444177301289968668_n.jpg
 
i had a sweet feeling also when I got the first k11 strange but less rd noise than my k-tenant and a more solid feel . enjoy this area :)
 
We used nail varnish remover too :) soak some kitchen roll in either and press it onto the glue and leave it go have a coffee come back and itll be nice and easy to remove :) x
 
If you are doin to leave it though use petrol and then if necessary nail varnish to remove the last bits the and awesome clean with some fairy liquid to remove it all :) x
 
did use nail varnish, it worked better than anything so far, my engine bay, has lots of rust on pretty much everything,, is this normal? or have i bought a really bad k11? :S
 
did get a bottle of rust restorer/treatment, the manis pretty much done for, where the bolts hold it on the mani theres just crumbled away, must be why my emmision lights on, will replace it with a 4-2-1, might explain why my engines a tad noisy.. loads of stuff to do with this, keeep uncovering more n more!
 
am looking for a drivers headlight, and wing n front facelift bumper if anyones got or knows some one? silver ofc, also want bucket seats and NEED a mani cause mines got holes in lol..
 
Last edited:
cheers mate, tis being a pain as its all first time everything, first car, all mods are first time ones etc, and finding parts is harder than ithought...
 
and if anyones selling 13inch wheels get at me please as theyre for this build. also have a trs tow strap in blue, not going on till front bumpers replaced.
 
front grills have been taken off and are being sprayed, the front badge had pretty much fallen off so i took it off and its being sprayed black along with them, once all is back on ill put a photo up, cheers to all who have took time to have a look at the progress.
 
polo coilovers and corsa bs on cuts for the rear on the way shell be low by next week! got a sparco bucket seat for the driver side being refurbed as we speak! and wellers end of THIS month instead! oh shes gonna look hawt!
 
Back
Top