year 2000 K-11 communication interface and protocol

[CMF_malindags]

Has anyone ever built/used any kind of a PC to ECU interface to read ECU data through the OBD-II style connector which has in the year 2000 K-11 Micras?

also please lemme know the communication protocol it uses in OBD-II style DDLs?

 

[CMF_LWC]

Build your own interface at http://www.plmsdevelopments.com/consult_if.shtml
PLMS is the result two guys from Adelaide Australia. Peter L & Martin S (PLMS).
A workmate build one and has it ported to his Palm pilot in a 300ZX, displays engine parameters while driving, etc.

 

[CMF_malindags]

PLMS interface did not work for K11. K11 has the OBD II style connecter while PLMS is for Consult type connecter.
Has anyone tried to communicate with K11 through a home made board?

 

[CMF_kneival]

My 1996 micra has consult, im sure all nissan cars have consult and not OBDII (nissan being difficult!)

I couldnt be bothered to build the cable so I bought one. You can get them from other places too.

 

[CMF_malindags]

This is the connector I got in my year 2000 Micra. Although the connector style is OBD II, the pinout is not falling in to any OBD II standards. Is this Consult II or something?

 

[CMF_kneival]

No idea.
This is normal consult..

http://www.plmsdevelopments.com/images_if/consult_connector.jpg

No idea what you have!

 

[CMF_malindags]

yes... that is the normal consult I interface.
My car is a Japanese used Micra (March).
Anyone else has this type of a OBD style connector?

 

[CMF_rumensat]

i have tryed - schema and software conzult free are working best on micra 1.3 1995.
but how to find moore flexible software with adjustments , flash dump and tuning facilities?

 

[CMF_rumensat]

please can anybody publish original ecu ROM 32k for micra k11 1995

 

[CMF_NotAnotherSSS]

I have a suspicion that only American delivered Nissans use ODBII!

 

[CMF_micra_pete]

the link hasn't come across properly, just copy and paste the whole link into the browser

 

[CMF_rumensat]

thank you for bin file
there is some differnce betwin my and original one
most are one byte but by the end whall block of data.

next my ask is for ECU ROM MAP (TABLE) or *.adr file

i mean adress of functional data blocks in the file
this data is from 0000 -0EE0 adress

if i can do turbo chip i will give you for free.

 

[CMF_micra_pete]

hi, i will get you started

VQ - 8000 ECU / 0000 ROM
FUEL - 8400 ECU/ 0400 ROM
IGNITION - 8800 ECU/ 0400 ROM

from 9010 - FFFF, is the programme

 

[CMF_rumensat]

thank you - this is esy to find
but limits and constant are terrible.

about pc board changing eeprom - it is haviest way - i mean picture with two 8 bit big old chips, instead that we can use 16 bit 48 pin flash chip TSOP (39vf400, 39vf800) - they are small and surfice mounting and can be biger - with 4 to 8 images on it swiching with small switch, and can choose betwin different rom versions - turbo , economical , winter ..etc.

 

[CMF_micra_pete]

the problem with using 16bit chips is getting and affordable board to make them, i can have multiple roms how i do it also, but it only takes 5 minutes to re-flash my eproms.