Polarbears Garage.

CMF_Polarbear

» CMF Member
Member since:
Posts:
So in this thread I plan to document the progress of my Micra mostly with pictures.

So, without furthur ado here's the first shots of my Micra.

13112009ed.th.jpg

http://img195.imageshack.us/i/13112009ed.jpg/
This is the first photo I took, just finished the paper work and drove it home, 10 minutes to get ready and get to work :p

17112009i.th.jpg

http://img5.imageshack.us/i/17112009i.jpg/
Pulled the grill and front bumper, getting them cut and plastic welded.

Future plans include getting some extractors and a new exhaust (I'm looking around at prices now), replace the air intake, remove the bumpstrips, a new paintjob (most likely the championship yellow that swift sports are), a new stereo with 2 12" subs, black and yellow interior, new door cards, clean up the rims and probably paint them black, fit my double sided taped on spoiler.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
Got the grill and bumper back. Not entirely happy with the quality but it will look great once it's all painted up. Painting the car and the interior recolouring should be next week. I hope the paint I put on the dash plastics doesn't peel.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
I haven't actually done it yet, looking into paints now. Would I need any sort of flex aid stuff if I was using the interior plastics paint stuff that I spotted at super cheap auto?

Also Gibson, the edit button is your friend.
 

CMF_gibson_racing

» CMF Member
Member since:
Posts:
thankx mate yeah you will because the plastics are let say in the sun and they are expanding and contracting as the car cools down and heats up inside and i have seen heaps of people spray there plastics without using flex/primer and after like 6mths or less the paint is cracking becasue they haven't used it
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
Alright I'll remember to get some. I think the guy who is doing my car is getting some plastic primer and also flex additive so we can spray some of the plastics in my car with the same paint as the car. Dunno what I'll do for the black bits, get some paint he can put the additive into as well...?
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
Got started working on the paint today.
Also it was something like 35 degrees C out today...
24112009q.th.jpg

http://img97.imageshack.us/i/24112009q.jpg/
24112009002.th.jpg

http://img413.imageshack.us/i/24112009002.jpg/
Door panels and trim off.

24112009003.th.jpg

http://img301.imageshack.us/i/24112009003.jpg/

There goes the number plates and tail lights

24112009004.th.jpg

http://img685.imageshack.us/i/24112009004.jpg/
24112009005.th.jpg

http://img97.imageshack.us/i/24112009005.jpg/
Pulled my bumpstrips and found rust underneath :( Nothing a bit of grinding and some bog can't fix :p

24112009006.th.jpg

http://img692.imageshack.us/i/24112009006.jpg/
24112009007.th.jpg

http://img301.imageshack.us/i/24112009007.jpg/
Filling the bumper (front and back)
Removed the stickers too

24112009008.th.jpg

http://img688.imageshack.us/i/24112009008.jpg/
24112009012.th.jpg

http://img413.imageshack.us/i/24112009012.jpg/
Almost ready...

Plan was to get the bog primered and ready for the final sand before spraying. Should be spraying it on Friday.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
I like having a wiper there (when it actually rains) and it doesn't detract too much from the overall look, also because the car is going to be uber bright yellow the wiper/window will break up the yellow a bit. Also my black spoiler :p
 

CMF_Pierce

» CMF Member
Member since:
Posts:
Polarbear, so you're painting this yourself? or having a shop do it? If you are doing it yourself/ have done it before, any tips you feel like sharing for someone doing it soon for the first time?
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
I have a mate who has experience and is doing it for me, I'm assisting. I can try to give you some tips based on what I've figured out so far?

Get a big enough space, you might need to have the doors open AND have room to walk around them. We are doing my micra in a 6mX6m tent/gazebo thing (carpet on the floor when we get round to painting to stop dirt coming up into the paint). A big shed would be better.
Use decent tools, we've already burnt out an old sander and had to go get a couple of new ones. :p
Umm, be aware the compressor will be noisy.
Make sure you sand it all down properly else the new paint won't stick properly and you will have problems with it flaking in the future.
Mask it properly, if you leave a bit of the black rubber showing and get that painted it's better then masking over the body and having bits around your seals not painted.
Set up some ventilation and run it all the time you're working. We have a old big toolbox with a fan sucking air outside through a pipe. Sheets cover the front of the toolbox where the air comes in to catch the particles. It catches the dust/paint and you can just change the sheets when it gets too much on it.

Oh and make sure you keep track of the screws and plugs and bits so you know where to put it all back.

This is all just observation or simple-ish logic though...
 

CMF_daily_ricer

» CMF Member
Member since:
Posts:
Polarbear, I understand if you're on a tight budget why you'd maybe tape up the rubber around the windshield and hatch window. They'd be hard to remove without cracking, and probably need them professionally fitted again.

But it wouldn't be that much work to just wind down the door windows and at least remove the window and door rubber surely? lol I'm pretty picky and know that if I was doing it, even just the slightest bit of overspray on these rubber bits would bug me when its all done. I don't know, you might be able to clean it up after with some thinners or something but yeah. Just a thought.
 

mik

» CMF Member
Member since:
Posts:
i agree with daily_ricer, if you do a respray, do it properly and strip the car at least to the easy to remove bits. its much easier to later on add/remove stuff, as its painted everywhere and not comming the old color out if you have a rubber missing somewhere or your fitting different things which have maybe other mountings.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
It has been painted! Now I need to finish up my dash and other plastics... Install my headunit and speakers (subs and amp to come when I have $$) and put it all back together so I can drive it.

Photo's? Ok...
The light from the tent doesn't do it justice, it's such a bright vibrant colour.
p1040597s.th.jpg

http://img7.imageshack.us/i/p1040597s.jpg/
p1040598.th.jpg

http://img248.imageshack.us/i/p1040598.jpg/
p1040600.th.jpg

http://img109.imageshack.us/i/p1040600.jpg/
p1040602p.th.jpg

http://img301.imageshack.us/i/p1040602p.jpg/
p1040603l.th.jpg

http://img7.imageshack.us/i/p1040603l.jpg/
 

CMF_Polarbear

» CMF Member
Member since:
Posts:

CMF_Polarbear

» CMF Member
Member since:
Posts:
Gah, forgot to come back and post em.

Thursday morning: YES MY NEW CLUSTER!!
tachod.th.jpg

http://img38.imageshack.us/i/tachod.jpg/
Thursday night: FFFFFFFFFFFFFFUUUUUUUUUUUUUUU
crash1o.th.jpg

http://img23.imageshack.us/i/crash1o.jpg/][/URL]
crash2h.th.jpg

http://img34.imageshack.us/i/crash2h.jpg/
crash3o.th.jpg

http://img5.imageshack.us/i/crash3o.jpg/
crash4.th.jpg

http://img696.imageshack.us/i/crash4.jpg/
And now:
20022010.th.jpg

http://img136.imageshack.us/i/20022010.jpg/
I also have fixed most of the damage. The grill didn't get replaced and has a tiny crack and some marks on it still and I don't have a condensor fan as the wreckers gave me the wrong one.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
Small update without any pictures. I am now in Brisbane for about 6 more weeks, still trying to find a condensor fan that will fit my poor little micra (got a sunburnt arm driving down from Rocky)

I have picked up some pulsar brakes but I probably won't fit them till I'm back in Rocky as I think I'd need some assistance doing it.
I also got some new wheels really really cheap but didn't get a chance to check the stud pattern (damned ebay sellers) So I should check that out... If they won't fit it'll be back onto ebay with them!
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
I was thinking about redoing the bumpers in black. Partly because I didn't get to modify the replacement front bumper and also there are a couple spots of paint that are cracking and flaking, obviously the flex aid didn't work so well the second time we used it.
 

CMF_Polarbear

» CMF Member
Member since:
Posts:
Browsing my facebook photos of my Micra I spotted a couple I missed.

I put some stickers on my mirrors about a year ago, then a month or so later I stopped at a red light in front of this and couldn't resist the photo.
micralambo.th.jpg

http://imageshack.us/photo/my-images/836/micralambo.jpg/

Bought some tail lights from someone on here a ways back. They are great! Replacement on the driver side obviously.
micralights.th.jpg

http://imageshack.us/photo/my-images/812/micralights.jpg/

And finally my current project. New door cards! Also fixing the dodgy job of installing the speakers that my mate did.
micradoor.th.jpg

http://imageshack.us/photo/my-images/546/micradoor.jpg/
 
You must log in or register to reply here.

Similar threads

mickey&me
Garage Clearout
Replies
0
Views
937
mickey&me
mickey&me
P
Headlight Problems after clutch change by garage
Replies
6
Views
1K
wilsonian
wilsonian
wilsonian
Garage clear out - all must go!
Replies
33
Views
2K
wilsonian
wilsonian
M
New to msc check out my micra
Replies
14
Views
2K
micranismo
M
C
FS [BRIS] '95 SLX unreg, possibly parting.
Replies
33
Views
389
CMF_Polarbear
C
Back
Top