Pictures of my K11

[CMF_Tyrie]

LowMicra do you have a part number for a Quaife LSD to suit 1.3L K11? I couldnt find a listing for one on demontweaks...

 

[CMF_Tyrie]

ah k I'll do that. They are good for streeters, the only problem with them is you get zero drive if one wheel is off the ground. Not such a problem with a micra (hopefully) but I'd never use one in a stiff RWD car.

 

[CMF_Greo]

found this...

 

[CMF_deNs]

From the article:

"Something like being teleported to the homeland of the cars origin.

As in, Sunderland, England?

Looks good, anyhow

---dens

 

[CMF_RBLUV]

did you end up running this on 12psi? did you need to mod the hks mani at all to fit it?

 

[CMF_jcmicra]

still using the hks manifold, had to slightly shave the mani to fit the turbo under the bonnet, only the slightest. running 12psi at the moment, im still running a 2and a half inch dump to a 2inch exhaust...looking at finishing the exhaust next week with my HKS hi power muffler and maybe gate/screamer pipe it too lol

 

[CMF_kovert.k11]

jason... got a brand new tial 38mm wastegate if ur interested bro

 

[CMF_jcmicra]

ahh kovert u always seem to deliver lol, how much? i dont think my email address is working...

 

[CMF_kovert.k11]

$260 posted mate

 

[CMF_SSUK]

Looking great and another quality build! What's the boost threshold like on the GT28R?

 

[CMF_95Micra]

I just read this thread, man what a GREAT job you have done. Looks really good and keep up the good work

 

[CMF_jcmicra]

Kovert: im still thinking if i should go for a 38mm gate or a bigger one, will it suit my setup? running 12psi planning on upping it to 14psi later on. Researched that bigger gates are better for low boost so i was thinking about a 44mm gate. What else do you have hidden in the garage that i dont have?

SSUK: Thanks im running a R33 GTR turbo at the moment and its handling the boost very well. no overheating (even with that front bar of mine...) everything in very good condition still

95Micra: Cheers will continue to throw money into this thing after i have a holiday so i will update whenever i put something new on

 

[CMF_95Micra]

ah good to hear, yeah I will keep an eye on this thread

 

[CMF_kovert.k11]

i'm using a 38mm tial on the slayer mate - i'm sure it'll suit ur build nicely

 

[CMF_jcmicra]

come brand new in box? ill take it mate, i trust your word after so many purchases from you can you send me a paypal invoice $260

 

[CMF_kovert.k11]

yeah mate - brand new in box... never used, not even fitted to a car.. paypal request on its way

 

[CMF_kovert.k11]

wastegate posted this morning mate... got a pair of OMP frp seats if ur interested... been used for 2 track days only! rest of the time they've been stored - basically brand new... $700 for the pair (with sparco aircraft grade billet mounts)

 

[CMF_jcmicra]

hey kovert, might give the seats a miss, my fixed bucket is still going strong

Also a update, got my custom exhaust made 2.5inch all the way with twin pipes



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Also got my Tial 38mm gate but the workshop i go to will be on holidays till january, so ill have to do that abit later



Uploaded with ImageShack.us

 

[CMF_95Micra]

The gate looks good, Like the exhaust but just a whisker long man. Other then that keep it up!

 

[CMF_jcmicra]

haha i wanted to make it long trying different things with this car lol it sounds really good

 

[CMF_95Micra]

Yeah I thought you were

As long as it sounds good you can get away with that sort of stuff

 

[CMF_peposhi]

That's one really gorgeous Micra!

Congrats!

 

[CMF_PLZ818]

IV SEEN BOTH OF YOU!!! more of the silver micra round rocklea an i did catch a flash of your round slacks where i work im fairly sure (maybe not) anyways ill be keeping tabs

 

[CMF_RBLUV]

..

 

[CMF_jcmicra]

^ LOL RBLUV take it easy

can't believe im still throwing money into this thing...something came today, waiting for it to dry

Aspect Carbon Fiber Duck Wing



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Proper photoshoot coming soon

 

[CMF_peposhi]

Excellent choice!

 

[CMF_climberjoel]

looks great!

 

[CMF_RTK]

Bloody love it... Some much want

 

[CMF_Tinky]

Nice flow from the roof...might cause u to go into orbit

 

[CMF_RBLUV]

yeah, thats cool

 

[CMF_jcmicra]

some progress: Tial 38mm external wastegate + screamer pipe, exhaust note wasn't what i was after so an extension was made (sounds so much better now), boosted up to 14psi and made 200hpatw

Tial 38mm:



Uploaded with ImageShack.us

Installed with screamer:



Uploaded with ImageShack.us

New exhaust: Love or Hate...



Uploaded with ImageShack.us

from Kovert, a new dizzy:



Uploaded with ImageShack.us

 

[CMF_RTK]

Nice

Looks like your rear bar needs a paint

 

[CMF_jcmicra]

so...after installing the dizzy, ran it on the dyno on 14psi, head gasket decided to rest in peace...so now i have to decide what to do...
anyway, i bought these off kovert for a little help on the rebuild process: Mulholland Cam Gears and AJUSA head bolts and valve regrind set



Uploaded with ImageShack.us

still brainstorming how far i want to go with this thing...

 

[CMF_RTK]

See if there is a place that can make you up a aluminum head gasket ? That would be good

 

[CMF_frank2]

2 nissan head gaskets, and make do with 180 f/whp imo, these k11,s were,nt designed for 200 whp ffs

 

[CMF_jcmicra]

LOL frank its making 200+hpatfw with this setup atm with stock internals n that, maybe after a rebuild ill keep it at 200 flat and just enjoy it as is lol. I only wanted to turbo it to keep up in the straight lines with others, im focused more on the cornering ability of this car and ill take it to the track as soon as i get it back from the workshop was thinking about getting a metal 2mm head gasket

 

[CMF_RBLUV]

damn bad luck about the gasket mate

 

[CMF_jcmicra]

got myself a badboy bonnet



Uploaded with ImageShack.us

Bee-R Rev Limiter



Uploaded with ImageShack.us

SSR MK3's (F 14x7, R 14x8.5)



Uploaded with ImageShack.us

Getting ready to fit



Uploaded with ImageShack.us

Rear fitted (4x114.3 conversion)



Uploaded with ImageShack.us

Another angle...



Uploaded with ImageShack.us

Another angle of camber...



Uploaded with ImageShack.us

 

[CMF_jcmicra]

Thought i'd like to share my honda zoomer build here as well coz i bought it from this forum

chrome foot pegs fitted on day 1



Uploaded with ImageShack.us

Slapped some stickers on it



Uploaded with ImageShack.us

Yoshimura not long after



Uploaded with ImageShack.us

LOL it fits in my elgrand



Uploaded with ImageShack.us

Low seat rail + chrome side mirrors installed



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Many parts start flowing in from now



Uploaded with ImageShack.us

Many Performance parts



Uploaded with ImageShack.us

Installed



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Fatty kit arrives



Uploaded with ImageShack.us

Longer wheelbase



Uploaded with ImageShack.us

Rising run radiator cover



Uploaded with ImageShack.us

getting there...



Uploaded with ImageShack.us

 

[CMF_jcmicra]

Zoomer Mods so far:

AK Garageworks 10x8 Fat Boy Wheel Chrome
AK Garageworks Engine Frame Extension
Yoshimura TRC Full Exhaust STAINLESS STEEL
KITACO KEVLAR Belt
KITACO CDI Unit 12000rpm+ ECU
KITACO Pulley Kit Type-III
KITACO Side Stand Chrome
Kijima Chrome Aluminum Coolant Tank
Battlescooter Air Filter Kit
NCY Footrest Frame Brace Rack + Pegs CHROME
NCY Chrome Adjustable Rear Coilover
NCY Coolant Tank Cap
KIJIMA Handle Mount Kit
DAYTONA Drag Handlebar
Password:JDM Variator Ghost Cover
Password:JDM Radiator Ghost Cover
Password:JDM License Plate Re-Locator (Swingarm)
Password:JDM Axle Spool Kit
Password:JDM Fender Washers
Password:JDM Halogen Bulbs
Stainless Gas Tank Cover
Low Seat Frame
Chrome Side Mirrors
Chrome Headlights
Daytona Oil Temp Dip Stick
Spoon Radiator Cap
NGK Spark Plug
KEIHIN Main Jets
POP Roller Kit

 

[CMF_climberjoel]

good to see the parts from 'awesome micra' are being put to good use! nice work its looking cool.

 

[CMF_RBLUV]

Yeah this where all the good parts went!

 

[CMF_schmykel]

bump for an awesome thread/car

I saw the feature on Speedhunters a little while back, well done!

any updates?