N13 pulsar brakes

[CMF_ed.]

Are these an upgrade item for the micra?
Talking about calipers
I think the rotors are either 240/250mm depending on the motor.

Thanks,
Ed

 

[CMF_nz_aj]

Usually people talk about using N14 & N15.
Was N13 100mm PCD like K11 or 114mm PCD? Can't remember anymore.

 

[CMF_ed.]

4 x 100 I'm 99% sure.

 

[CMF_LWC]

DBA website has a manual with the Nissan brakes in there, I remember the N13 has 4x100 pcd but check the offset mm.

 

[CMF_ed.]

Anyone know if N16 brakes would fit the micra?

 

[CMF_Yom]

They're not a direct bolt on (N16).

N13 use similar brakes to the N14 1.6L. Personally I wouldn't buy them as they're old and probably worn out.

 

[CMF_Yom]

No no, the bolt holes for the calipers not the wheel studs.

 

[CMF_Yom]

ed. WROTE:

"Bolt holes are 4 x 100.

We lined them up perfectly yesterday @ delux with a stock micra hub.

Caliper bolt holes, not wheel studs sorry!

 

[CMF_ed.]

I went to Delux yesterday to compare hub/calipers and it seems my hub is different to the stock micra hub, my brakes are bigger than stock micra yet I can still fit 13" wheels on.

I'm thinking I have N13 hubs/brakes on unless some micra's came with diff brakes?

I'll take photo's tonight.

 

[CMF_Yom]

Take pics. If your rotors arent solid then I guess there's a chance you've got Jap hubs which will accomodate a wide range of proper sports car calipers from the nissan stable.

Best bet is to measure the distance between the bolt holes.

 

[CMF_ed.]

Bolt holes are 4 x 100.
We lined them up perfectly yesterday @ delux with a stock micra hub.