• Please only use these forums for blogs, they are not a discussion forum

Micra K11 So far..

Micra K11 **MOT on Friday 10am**

Nissan Micra K11 Face-lift.
2000 X reg 1.0 16v CG10

I ended up buying this as my Saxo has some rust issues and i needed a car quick so i bought a Micra. I wasnt even ever going to buy one but it came up silly cheap and just had to have it!

£600
61k miles

So far the what ive done;
  • Colourcoded the bumpsrips, mirrors
  • Added SI spoiler
  • Added SI fogs
  • Outrolled zoorst tip
  • FU sticker, PT sticker
  • Flat wipers

Small list, small amount of coin. :laugh:

*Click* Next set of mods;[/COLOR]

SDC10308.jpg

SDC10306.jpg

SDC10309.jpg

SDC10302.jpg


Its first little rinse;

SDC10338.jpg


Gave the engine a clean;


SDC10333.jpg

SDC10334-1.jpg


Redone the wheels in Black with Blue lip;


SDC10362.jpg

SDC10361.jpg

SDC10360.jpg

SDC10359.jpg


A few months later i decided i was going to "modify" it on what ever spare coin i had, why not? :p

Started with the White Toe eye;
Front
toeeye1.jpg


Rear;

reartoeeye.jpg


Undersealedthe boot and repained the Axel;
Before;
reartoeeye.jpg

After;
axelpainted.jpg


Tried de-wipering but it looked wrong;
bkright1.jpg

So back on the wiper went;
bkside.jpg


Well i got keen and thought its old anyway so if i/bro #### it up it wont be such a issue. Lucky for us it worked out.

Bro masking/spraying, in that time we fitted the SI spoiler and re-did the steelies;
resrayn3.jpg

maskedy0.jpg


After shots;
closefront.jpg

closerear.jpg

redonemirrors.jpg

done.jpg

front4.jpg

wheel-1.jpg


Yes its eletric tape on the headlights; :001_rolleyes:

brows.jpg

brows2.jpg

brows4.jpg

closeupbrow.jpg


Before colourcoding;
frontside-1.jpg

rightfrontwheel2.jpg

rightfrontwheel.jpg

side.jpg


After with wheels etc;
side4.jpg

sideright.jpg

fullydone.jpg


justfogs.jpg

newfogs2.jpg

newfogs.jpg

fullydone2.jpg


newzoorst.jpg


rear1-1.jpg



Bought a Stainless steel outrolled tip for £20 of zee net because i had no intention of buying a noisy backbox;

zoorst-1.jpg


newzoorst.jpg


Thats it for now...
 
haha, dont think thats safe enough? pmsl.

Cheers. :D

Wouldnt mind a really cheap backbox i can bolt on... cba to get mine welded back on. :(
 
Looks nice and clean, and good job on the colour coding, looks like mine! It's nice to see another blue facelift blog too. But is that stock height, I don't remember them being so high:wasntme:
 
Needs lowered

vvvvvvv
 

Attachments

  • frontside-1.jpg
    frontside-1.jpg
    122.2 KB · Views: 328
  • side.jpg
    side.jpg
    127.8 KB · Views: 338
  • side4.jpg
    side4.jpg
    137.7 KB · Views: 319
Missed a few things from my other thread;

Changed the fuel filter and dear me.. as i (dad) took it off tipped the petrol out it was a dark grey. :blink: So i dread to think how long thats been on. :mad:

The leads and spark plugs got done about 3 month ago so no need to change them IMO.

Didnt look like there was much oil in either after it emptied it; :eek:hmy:
SDC11551.jpg
(dad in the pic btw, pmsl)

The oil shot; ;)
SDC11549.jpg

SDC11550.jpg

SDC11553.jpg


After i got this sticker;
Well ive just put the PT and other sticker on. :D

Cars dirty so will take fresh ones next week;
Dirty car
P120311_18150001.jpg

P120311_18160003.jpg


Booked mot for saturday. :scared:

Gave it a proper clean today.. long day tbh. Didnt clay again as i did that the other day. Polsihed and waxed etc. Few pics.

Close ups of the reflections;
SDC11580.jpg

SDC11579.jpg

SDC11577.jpg

SDC11576.jpg

SDC11571.jpg

SDC11570.jpg


The lucky owner himself; :001_rolleyes:
SDC11575.jpg


Been offered a set of Super S/R or SI alloys for £40. Not sure which ones but either way they are all fine The fella is fetching them over on Saturday for me to look at so i could get them than.

Which i think look like these;
T350BKX.jpg


Or these;
t4231.jpg


Or these;
DSC01120.jpg


Just a example btw

They're 13" so i can transfer my tires from my steelies to the alloys if needs be. :thumbup1:

BUDGET MODDING FTW
 
Looking good! Also you be £500+ for sill replacement if you want them to look like they havent been replaced. If you can weld DIY it!
 
Looks nice, same colour as mine. I like the colour coding and foglights, looking to get foglights for mine.

I say leave it at standard height.
 
Looking good! Also you be £500+ for sill replacement if you want them to look like they havent been replaced. If you can weld DIY it!
£500, wow they look and seem solid. (fisted them and poked them with a screw driver) and no soft metal so it must be fine. :D cheers.

Love the color!
Take good care of your Micra and Micra will take good care of you :)

Yeah its been a great car. Has a knocking noise on the pass front wheel side. no idea what that is but its still pressig on well. Its defo been worth buying. Love the thing. :p

Looks nice, same colour as mine. I like the colour coding and foglights, looking to get foglights for mine.

I say leave it at standard height.

Fog lights took me ages to get hold of! colour coding was done in the yard on a sunny day and luckily for me it came out well. :D

Once my mots done.

New plates double sided on. No screws!

And a new backbox.

Might gloss black the fog covers. and little black grill in the bumper.

And maybe new clear indicators

Cheers guys. :D

Il update on my mot results on friday afternoon. :)
 
Ive just had a call from the garage, needs 3 things for it to pass so its getting booked in for tommorow 9am.

Yas im buzzin' meh tits off! :D

01/04/2011

It needs;

Front brake pad(s) less than 1.5mm thick [3.5.1f]

Offside front track rod end balljoint has excessive play [2.2B.1f]

Nearside front suspension arm has excessive play in a ball joint [2.4.G.3]


So about a £100 lol. That also should stop my nasty knocking noise as i pull off and change gears from 1st to 2nd. Good times.

Im chuffed tbh, considering its age etc.

---------------------------------
Alloys on Saturday
Sportex zoorst will be getting ordered on Monday. :D
 
sills are done at £30 for half the length of sil to be welded..... I know my last micra had a pretty hard time with rust on the sils :(
 
sills are done at £30 for half the length of sil to be welded..... I know my last micra had a pretty hard time with rust on the sils :(

They're fine for another year thank god haha. Not even a advisory on them. Well i checked them over myself and thet are prett solid and obviously passed. :p
 
UPDATE

Anyway, got the car passed, yas! 12 months and 3 weeks. :D

So i went to view the wheels. No one kerb mark at all! just a bit of paint peelage here and there. £40 Ideal. So next week i'll be getting my tires off my steelies put onto my alloys. Yes both are the same size. :thumbup1:

Pics of Super S wheels;
SDC11605.jpg

SDC11606.jpg

SDC11607.jpg

SDC11608.jpg

SDC11609.jpg


On the car;
SDC11610.jpg

SDC11611.jpg

SDC11612.jpg

SDC11613.jpg


It wants lowering now. :(

Cheers.
 
Take some pics with both wheels on and ill do you another photoshop if you want?

Nice bargain on the wheels! Gonna paint them?
 
Take some pics with both wheels on and ill do you another photoshop if you want?

Nice bargain on the wheels! Gonna paint them?

Thank you :D :) it was a offer i couldnt refuse, ive wanted alloys for ages anyway!

Actually could you do a photoshop of that in white/grey/black pls if you dont mind!
 
Done, grey, black and gold mate. Gold came out a bit jaggy.

And lowered
 

Attachments

  • John, gray, lowered.jpg
    John, gray, lowered.jpg
    270.3 KB · Views: 310
  • John, black, lowered.jpg
    John, black, lowered.jpg
    267.1 KB · Views: 296
  • John, gold, lowered.jpg
    John, gold, lowered.jpg
    272.9 KB · Views: 315
Car looks premium,

So how do you find the micra as opposed to a saxo then?

Suprised i've not seen my equation alloys on any of the stock s series micras.

I would of thought a blue/white colour scheme would look nice on that (With the current exhaust sticker etc)
 
Done, grey, black and gold mate. Gold came out a bit jaggy.

And lowered

Looks awesome! thanks alot! :D

Car looks premium,

So how do you find the micra as opposed to a saxo then?

Suprised i've not seen my equation alloys on any of the stock s series micras.

I would of thought a blue/white colour scheme would look nice on that (With the current exhaust sticker etc)

Power wise it feels no different, goes round the bends no different but the brakes feel muchhh better! but in the long run its been cheaper to look after. :D

I was thinking white but they are a pain to keep clean, i know because of my white lip on my steelies
 
Also Sportex 3" zoorst ordered on tuesday.. should get that next week? :D

sportex-bn1s3.jpg


Well me and my bro was bored and i wanted to save some coin. So i took a jigsaw and a few other tools to the tires. :D ghetto? ofc. ;) The other 2 are Toyos and im not taking them off.

*disclaimer. no we didnt hammer away at the alloy blah blah...*

208634_163599523698866_100001464594183_400582_2993155_n.jpg


Cheers.
 
**UPDATE** 3 wheels done. :D 9/04/011

Been (and bro) grafting all day and got them best i can and they look nice. :D last one will be done tommorow. :thumbup1: The best looking grey i could get was Ford Graphite Grey. Some of you's will see them at the Bolton meet. :)

Sanded down/nitromorsed;
SDC11650.jpg

SDC11655.jpg


Primered;
SDC11651.jpg


Painted;
SDC11653.jpg

SDC11654.jpg

SDC11662.jpg

SDC11659.jpg

SDC11664.jpg

SDC11665.jpg

SDC11666.jpg

SDC11667.jpg

SDC11668.jpg


Centre caps;
SDC11658.jpg

SDC11661.jpg


4th wheel will look like the above, lol. :p

Cheers!
 
Haha the best way ;D

So is that a specific colour code you've used or just a can of grey from Halfords?

Gonna look good against the blue (Y)
 
Haha the best way ;D

So is that a specific colour code you've used or just a can of grey from Halfords?

Gonna look good against the blue (Y)

Just a normal can off the shelf. i need one more laquar and grey which il get tommorow if its open. Fingers crossed the tires off my steelies will go on or il have to wait a bit longer. grr

hang on, hang on, what happened too 'no intention of getting a noisy backbox' ? :wasntme:

Well i had a japc on but it was OTT so took it off, bought a decent tip and gave up on the noisy side of things. but now the hot weathers here i want to rev about ahaha. braap *pop* etc.

nice preperation and you have some class 1 alloys nice job

messed mine up a bit last summer
ghethole version

TOP ALLOYS THESE you can drop really low!!!

Lol, keen sprayingthem already on lol :p i was either going to polish them up or spray but with the centre cap plastic i just sprayed them instead.

They're awesome wheels. and i cant wait to get them on! and my zoorst. :D :D

Thanks for the comments. :)
 
***UPDATE***

Alloys on!

Zoorst didnt come today. fml. A lighter note. My alloys are on. :D

Only thing that lets it down is the paintwork tbh. Its due a mega wash and polish! :(

1 pic will go in the abandoned pic thread.

Pics;
SDC11676.jpg

SDC11682.jpg

SDC11681.jpg

SDC11680.jpg

SDC11678.jpg

SDC11677.jpg


Total of balancing etc etc of £28. :D

Cheers ya'll
 
location location:grinning:
that is what it is king 11!
just a little lowing would make it complete,leaving you to get on with the bodywork
taste
 
location location:grinning:
that is what it is king 11!
just a little lowing would make it complete,leaving you to get on with the bodywork
taste

Ahaha a old powerplant. :p

Yeah bodyworks next inline i think! it definalty needs machine polishing, so il be saving up for one of them next. (Y)
 
you know how to use a mop to polish
may be worth getting one, their like grinders but have a variable power trigger
 
you know how to use a mop to polish
may be worth getting one, their like grinders but have a variable power trigger

Yeah i know, DA's Cant afford one right now. lols.

Update;

SDC11900.jpg


SDC11899.jpg


Just needs cleaning up..

MK3 Golf GTI splitter. A total cost of £5 aha. ;) :p

Another update regarding the fogs next week. ;)
 
Looking really nice now (Y). In the 4th pic down above, it looks like you've got the baddest-ass bazozuku (spelling??) exhaust EVER :laugh:.
 
well i added yellow fogs not long after that post ^ as ive not seen one single micra with them yellow fogs, maybe the older Sr ones yes on this site.
after that splitter couple of moar stickers and 2 vids - brap

http://www.youtube.com/watch?v=mcMBVcEaltQ

http://www.youtube.com/watch?v=weXF0k9e3IU&feature=related

Right, didnt post these up. Cheers Douglas bbz for putting the <3haters one on for me, hah. :p

Pics of old/no plates and new;
SDC11921.jpg

SDC11926.jpg

SDC11922.jpg

SDC11923.jpg

SDC11928.jpg

SDC11929.jpg

SDC11925.jpg

SDC11924.jpg

SDC11930.jpg

SDC11931.jpg


My pic of speedz - rebel iirc. (see sig) :001_rolleyes:
SDC12276.jpg


yes was on the M74 and pic to prove. qualo.

And my 2 of my stickers;
SDC12282.jpg

SDC12281.jpg




-------------------------------------

newish -

Well, i went out yday after getting a quote the previous day on a price of a centre section (£45) i lold and walk off and another quote of £33 delivered off a site (online automotive) Went to another garage and got one for £25 (inc gaskets) it proves if you look about you will get them cheaper!

Anyway it rolled on 12:30 yday, rolled it up on dads 20yr old wooden ramps with nothing infront of the wheels (boss way) than we went to rip the centre section off (it was literally that bad and extra noisy. ;) ) unc00l noise though. Go to pull it out from the backbox, FAIL. So out the angle grinder comes and beasted that! cutting the nuts from the old cat was ####in a nightmare, the drill bits we had were ####, felt like the drill was doing #### all. It took a hr and half to do 1 hole! LOLOLMFAO. Anyway we pressed on as thats what we do. It wasnt going to fix itself.

Pics of new/old
P200911_11430001.jpg

P200911_12580001.jpg


And the grindage. End of the day i was black, dirty...at least i saved £25 ;) only 6hrs of hell..
P200911_12580002.jpg

P200911_12590001.jpg

spark.jpg


God help me when i have to change the downpipe, HAHAHA. I just want to cry looking at the situation of the matter.

Cheerz.

pics;
 
Back
Top