Max revs

[swsupermot]

What's the STD top end able to rev to

 

[frank]

8500 with piper cams and stock springs :grinning: http://www.youtube.com/watch?v=dSPv0wIsPIA

 

[swsupermot]

8500 with piper cams and stock springs :grinning: http://www.youtube.com/watch?v=dSPv0wIsPIA

That's enough the piper ones any good also what about soils tapets

 

[frank]

That's enough the piper ones any good also what about soils tapets

fine for a 1.0, but autosprint 260/10mm lift ftw for a 1.3, and whats soils tapets ?

 

[will930]

instead of shims use soil?

 

[Antony]

solid lifters i think he means.

best gain i had with 3 different heads, 2 different sets of cams and adjusted ignition timing, dizzy mods was.

modded dizzy, full advance, stock cams with inlet cam advanced, lightly skimmed and fully gas flowed head, janspeed manifold and stock everything else.... that got me 96.5bhp at the hubs. got a dyno on the old old old site..lol:laugh:
stock rpm is 6400, but they have been known to run 10,000 in rally cars and upto 11,000 in japan... cg10 though i think.

 

[swsupermot]

fine for a 1.0, but autosprint 260/10mm lift ftw for a 1.3, and whats soils tapets ?

Sorry iPhone text. Yes do I need solid tapets
A few extra revs will help the gearbox
What's the rev limit and does it have one if you tape the slot on the dissy

 

[frank]

Sorry iPhone text. Yes do I need solid tapets
A few extra revs will help the gearbox
What's the rev limit and does it have one if you tape the slot on the dissy

they are solid, and 6800 or 6900 apparently, and i think the tape mod depends on what ecu you have