Has anyone fitted camber shims on a K11?
the stub is welded into the axle mate (and only the backplate is bolted)
So there is no chance for fitting a shim between the axle and the backplate (wedge shim)?
you can if you want to fwn , but it wont move the wheel (it will only move the backplate, and make the brakes rub)
Understood mate.
So, the only solution is to cut and weld the axle at the desired camber... :down:
i,m afraid so mate (unless you can get the axle bowed/curved, like a tuning shop near me does to almera,s)
You could grind a spacer down at an angle, every half a turn would look good lol
You could grind a spacer down at an angle, every half a turn would look good lol