FS: PROJECT DAILY ****BOX

[CMF_kovert.k11]

the time has come to reduce the collection of micras to make way for other projects that i have, so got this bad boy for sale: here are the details:::
97 series 2 LX (with 6months rego)
116xxxKms on it
aspect extractors (wrapped with magmawrap)/2" mandrel bend exhaust/magnaflow stainless hi-flow cat/trust muffler
brand new GA15 Throttle body/HKS pod filter
brand new Magnecor 8mm blue silicon ignition leads
ultrasonically cleaned/flow-tested GA16 injectors
walbro 255LPH fuel pump
mulholland lightweight water pump pulley
power steering installed
4.3kg Jun flywheel/exedy HD clutch/short shift kit
TEIN Sports Spec Driving Master Type HA Coilovers (good luck finding another set of these)
nismo engine & gearbox mounts
nismo front and rear swaybars/Nolathane bushes
cusco panhard rod and front strut brace
whiteline lower control arm brace, droplinks, camber bolts, caster kit and humphris adjustable rear trailing arms
super s rear axle (disc brakes)
N15 1.6L brake calipers/RDA slotted rotors/TRW pads
14X6.5 +40 Watanabes with brand new Kumho KU31 185/55 and rays duralight nuts
super s driver & passenger seats (rear seats removed)
Super s dash cluster
Super S door cards
micra floor mats
momo steering wheel + OKUYAMA carbing shift knob/s14 HKB boss kit
kenwood stereo
front and rear JDM super s bars (black) – driving/fog lights wired independently with UK fog switch
brand new depo black headlights
nismo tinted indicators
nissan spoiler
car handles like it's on rails...
wanting $3600 firm - ideal for someone who wants a nice NA setup with nothing else to do

 

[CMF_kovert.k11]

pm for further details

 

[CMF_kovert.k11]

2

 

[CMF_kovert.k11]

engine bay

 

[CMF_kovert.k11]

interior..disregard sparco wheel installed - will be sold with momo

 

[CMF_plattsy]

my mate darren is very interested in this kovert.... hes on about driving up from melbourne! all because i let him have a spin in mine lol

 

[CMF_kovert.k11]

well this is the car for him mate...everything's been done - she's a sweet little NA setup

 

[CMF_plattsy]

yep we spent a couple of hours talking about it yesterday, while we put the finishing touches on mine. hes talkin sr16's and na screamer. haha! ill get him to give you a shout.

 

[CMF_Seb]

Hey Kovert sorry to hijack your sale thread, but where did you found your Nismo ARBs bushes? I have the bars but can't find any bushes to fit them.

Good luck with the sale, so many nice aftermarket parts.

 

[CMF_kovert.k11]

all good Seb...bushes came from Japan mate..i'll try and find a link to them

 

[CMF_Seb]

Thank you!

 

[CMF_kovert.k11]

Seb, not had any luck finding the link to those bushes mate - will keep trying though..
oh, and BUMP

 

[CMF_Seb]

Thank you Kovert !
Btw in what consists the mulholland lightweight water pump pulley? Any details?

 

[CMF_Pierce]

Kovert,

Still for sale?

Please fill me in on some details:

Does it currently meet roadworthy requirements for QLD? If not what needs fixing.

Are there any major scratches in the paint? Dents in the panels? Does the hood look straight on both sides and flush with both quarter panels (only one side showing)?

A lot of awesome N/A upgrades there. My daily has had enough hits up the ass that I haven't been able to get it back to perfectly straight and my 100km/h in 5th or 4th has a ****ing annoying steering wheel wobble that I cannot stand. It's like steering with a vibrator turned up to 11...

Very keen to buy if no wobble, and any dents can be fixed with say $500 spent at the dent doctor.

Finally, how are the fuel pump,intake, lightweight pulley, injector & throttle body mods going without a tune? Any noticeable flat spots?

 

[CMF_kovert.k11]

Pierce,
Yeah, still here mate...absolutely nothing needs fixing!
I cannot think of anything that would stop you from getting this registered in QLD
There are a couple of very small dings - definitely nothing that couldn't be rectified by @ dent doctor.. bonnet is straight, as are the panels.. there are a couple of deeper scratches on the driver's door and a few lighter scratches here and there, but certainly nothing significant..
this thing is solid mate - no rattles/wobbles - no vibrations through the steering..
the upgrades/mods make for a sweet, responsive package - no flat spots; she just keeps pulling..
If u want some more info/pix, let me know mate

 

[CMF_kovert.k11]

Seb WROTE:

"Thank you Kovert !

Btw in what consists the mulholland lightweight water pump pulley? Any details?

http://www.mulholland-rp.com/eng.htm Seb...

 

[CMF_kovert.k11]

struggling to comprehend how i still have this car... BUMP biaaatches!

 

[CMF_Darrenb]

Hello, is the price still firm or able to move a little on it? Thanks

 

[CMF_kovert.k11]

i am willing to move a little Darren..

 

[CMF_gee-aye-dee]

This still for sale?

 

[CMF_kovert.k11]

yup!

 

[CMF_climberjoel]

gee-aye-dee WROTE:

"This still for sale?

crazy that this little weapon is still for sale, looks like a killer setup.

good luck with sale kovert

 

[CMF_kovert.k11]

cheers Joel...
admittedly i'm mystified that this is still sitting in my carport!?

 

[CMF_Pierce]

Kovert, post this on the micra facebook page.

Tell those R-Tards to stop asking for $15-1800 micra's to 'do up on the cheap'.

Try and explain to them that yours is above any quality quick build from 2nd hand auto wreckers.

It's such a good build, I know you appreciate the car; I hope whoever buys it appreciates it too.

 

[CMF_kovert.k11]

thanks for the tip Pierce, but i don't do FB mate... i know that the standard for a lot of "micra enthusiasts" is POV-spec, and that this is a quality build with quality parts - i don't do my **** any other way. someone with sense will appreciate this package and snap it up

 

[CMF_plattsy]

yea. shouldnt last long at this price.......

 

[CMF_Jason_R]

Still for sale? If so where are you located as I'm in the middle of finalising sale of my car and am looking to buy aomething in the next week or possibly two.

 

[CMF_Chi888]

Still for sale?

 

[CMF_kovert.k11]

sorry blokes...$OLD