can anyone work out how far they will hang outside std guards and if they will foul on any suspension components im not phased about the guards on the car
The most widely known offset calculator is <a href="http://www.1010tires.com/WheelOffsetCalculator.asp">this one</a>. From memory a 7-inch with +20 offset should bring it almost in line with the guards and from there you can use that as a base to compare it to what you want to do with it.
Frank you should've taken a complete side on pic That image doesn't show how far they stick out very well - it's kind hard to gauge from that angle.
"ok so can anyone tell me the width and std offset on a 95 lx .... and yeah that's the offset calculator i was looking for thanks heaps.<BR>
<BR>
Daniel
the stock steelies are 5j 45mm, and the ally,s are 5 1/2j 38mm iirc daniel, but the fronts will prodrude about 10mm more than the rears (unless you have a fair amount of negative camber on the front)
there,s some pics of my misses,s car,s altered offsets here http://www.micra.org.uk/showthread.php?t=22225&page=9