Search results

Has anybody had any experience wiring in a Bee R. I used the diagram that Scott.c put up but that didn't work, I also tried a few other wires from the ecu which are meant to be cas signals.

I'm after a gearbox for our work micra. 2002 1.0L Facelift with electronic speedo?

I made this ages ago and never used it. I'm not sure if its of any use to anyone? If you want to fit bike carbs or throttle bodies. £20 + postage? Offers are welcome

I've got a company that should be able to make some forged H beam rods at a very reasonable price. To make them they obviously need the exact dimensions of the original. Before I get the verniers, has anybody seen a nissan data spec sheet with dimensions, or someone else has already measured up...

Has anybody tested to find out what K10/K11 gearbag gives the lowest ratio? My new engine does 80 in 3rd which is unnecessarily high. Cheers :D

How have people fitted there throttle body on a cg engine after putting in the top feed cga injector rail. By the looks of it i'm going to have to drill and tap some holes? Jamie

Can anyone tell me if the coilpack 1.0l and CGA3 injectors are the same. Also is there any problems switching the cams from the 1.4 to the 1.0l on an otherwise standard engine? Jamie

Just a quick one. Is it possible to change the top timing chain without separating the engine. I went to do it later and the only way it seemed was to pull the balance shaft off which i didn't want to do just in case I messed up the timing.

Has anybody got the web address for all the individual part numbers on the K11? I had it but can't find it now :(

Quick question. When the engines running should the upper tensioner stay fully 'taught' it would seem the extremely noisy 1.3 in mine moves out and in?! Jamie

Hi, I'm after some performance cams that don't need reshimming :D I know this is a tall order but if anyone has anything that would be good :) Oh and they're for a cg13. Jamie

Hi guys, this is a tricky one butttt in my K10 with a cg13 engine it makes a terrible noise. At first I thought it was the exhaust hitting but i've sorted that. It sounds as if there's nuts undoing, a really metallic noise. I just wondered if anyones had the same problem? Jamie

What do you guys use to clean engine internals and cylinder heads?

I'm after some K10 wind deflectors if anyone has any they'd like too part with? :D

Just out of interest, has anybody messed around with independent throttle bodies? Like bike itbs, or bike carbs used as itbs?

Ive got my cg13 engine in the K10. But whilst im waiting for my carb manifold and megajolt. What wires and bits and pieces do i need to run it on the injection? I have a complete k11 at my house which i can rob all the bits from, but it is nats :/ Any help would be most appreciated

Does anyone know what the bare essential wires are to get the standard cg13 distributer to work with no ECU? Jamie

I know this seems like cheating, but i cant find the answer! What is the ultimate handling for the K10 using off the shelf parts? I know people use corsa and polo coilovers but that seems to be for lowering rather than handling. Any help would be appreciated

I just wondered if anyone knows if the length from wishbone to wishbone is the same from K10 to K11? Its just so i know where to drill the holes in the K10 wishbones to accept the front arb?

Just wondering if people would be interested in buying the Mintex M1144 brake pads PN: MDB1623M1144 Would be around £45+ postage. They would be brand new and boxed.