Water Pump Removal

[CMF_c.rusli]

Any one know how to remove the water pump from the k11 CG13 micra

With Aircond and No P/S

I have this Service manual in some kind of language that i dont understand and really doesn't do much help

I have attached my configurations (not to scale)

if any one have photos or know how can i take this pump and the belt off that would be great.

Cheers

 

[CMF_Doom]

errrr remove the belt, undo the water pump bolts and remove the water pump??

 

[CMF_c.rusli]

How do you remove the belt? i cant find any nut to find the the tensioner adjuster.

 

[CMF_sr20micramike]

Maybe you should take it to a mechanic mate

 

[CMF_c.rusli]

I bought the car with over heating issue,
this is my first nissan car.

and i am not familiar with the car.

i have replaced radiator and thermostat
and now last thing is the water pump.

i've worked with honda and mitsu all this time
not to familiar with a nissan

I only need to know how to remove the belt and i can replace the pump easily.

Cheers

 

[CMF_frank2]

There should be a 12mm adjuster at the back of the idler, and the nut on the idler needs slackening first
I usually remove the engine mount too, and jack the engine up

 

[CMF_c.rusli]

Ah! thanks, i found it!

Cheers!

 

[CMF_jmos]

That's not so easy IMO.

On the image:
1.
You have to loosen the nut that fastens 'Idler pulley' (17mm head).
For this you may have to lover the engine. (of course by removing the support screw)
2.
Loosen the tension adjuster (12mm head) found under the pulley.

 

[CMF_c.rusli]

jmos WROTE:

"That's not so easy IMO.

On the image:

1.

You have to loosen the nut that fastens 'Idler pulley' (17mm head).

For this you may have to lover the engine. (of course by removing the support screw)

2.

Loosen the tension adjuster (12mm head) found under the pulley.

I did found the tensioner and now having problem un-doing the 17mm bolt.

might need to loosen the engine mount to get a socket in before i start rounding up that bolt...