Turboing a CGA3 Micra

Hi all'!

I was thinking about a future project of mine, a Micra CGA3DE + T.
Now, what I Will need for the best increases?
These are my Ideas:

- turbo
- exhaust manifold
- intercooler and air tube feed
- new ecu
- bigger injectors
- tube for oil feed

What kind of turbo shall I use? And for ecu?
Probably have to install SR20 injectors so I have to change my fuel rail because mine are Bosch (i Will install a Fuel press reg).
I was thinking about pistons: they have to ne reinforced so, I can use forged Micra ones or take them from another car (maybe diesel are best), but I don't know which pistons Will fit in Micra (even with other crankshaft and rods).
Anything else i Will need?

Thanks a lot for replies!




Sent from my SM-G925F using Micra Sports Club mobile app
 

LiamC

I've ruined my car 🙁
Hi all'!

I was thinking about a future project of mine, a Micra CGA3DE + T.
Now, what I Will need for the best increases?
These are my Ideas:

- turbo
- exhaust manifold
- intercooler and air tube feed
- new ecu
- bigger injectors
- tube for oil feed

What kind of turbo shall I use? And for ecu?
Probably have to install SR20 injectors so I have to change my fuel rail because mine are Bosch (i Will install a Fuel press reg).
I was thinking about pistons: they have to ne reinforced so, I can use forged Micra ones or take them from another car (maybe diesel are best), but I don't know which pistons Will fit in Micra (even with other crankshaft and rods).
Anything else i Will need?

Thanks a lot for replies!




Sent from my SM-G925F using Micra Sports Club mobile app
Since you have a coil pack engine you have the whole range of top feed injectors at your disposal so no need to get an Sr fuel rail cut.

"It just looks like a scrotum" - Jeremy Clarkson on the K12
 
Top