Ride Height

[Agent_Sm1th]

Just after a little info. I lowered my car by 35-40mm a couple of months ago and it caught my eye the other day that the passenger side rear is not as low as the drivers rear. It differs by around 10mm.
I have used proper lowering springs, not cut or anything and they are seated correctly.
Is this something that is quite common or could any of you guys shed some light on it. Thanks.

 

[h701micra]

The front right corner is yiur heaviest corner. Pulling the rear left upward... not by much. But that's more than likely what it will be unless you've got something heavy in the car

 

[McMicra]

or the spring isn't seated properly? :L

 

[Agent_Sm1th]

Thanks guys. The springs are seated correctly.
@h701micra, Haha. Very funny. I might take it all apart and swap the springs round just to see. Bloomin rain is a right pain though. Can't do anything without getting wet through.

 

[blanes]

Interesting..... both my old K11's have rubbed my 15's on rear drivers side and not rear passenger side when on major dips and bumps. This can be offset by adding potatoes to the left side of the boot.

 

[davyboy]

Interesting..... both my old K11's have rubbed my 15's on rear drivers side and not rear passenger side when on major dips and bumps. This can be offset by adding potatoes to the left side of the boot.

Sacks of potato's even ???

 

[blanes]

Sacks of potato's even ???

yep, my car is chipped.

 

[Madmonkee]

Lol ^^ nice one

Sent from my GT-I9505 using Tapatalk