Newbie from Sing.

Status
Not open for further replies.
omsin

omsin

Ex. Club Member
:k11motors

Hi all, I am from Singapore(the place where the recent F1 Night Race was held) and owned a Micra Lx 1.0,manual,1995 pre-face lift.
Had it for 6 months and done the following mods:-

CG13DE(japan,auto)
Bolero tail lights
Cold air intake
Remus muffler
15" sports rims/205/45 tyres
sports steering

Will post some photos soon.
A fantastic club! Considering joining as a Bronze member soon.
 
Thank you for the warm welcome.
Bought a Jun flywheel but still not fitted(not sure what to change in total besides the 1.3 gearbox)
Will put in Cams
Piggy back ECU
4-2-1 Extractor
a pair of Bride seats.

Cheers!
 
HaHa, Like my wife says ' 2 Brides or Nothing '
BTW how much did you pay for the seat?
In Singapore a new one cost around 400GBP,
a second hand Japs import cost 150GBP.
 
I got mine second hand off a friend from an AE86 for €180 im not sure what that is in GBP.
 
hi omsin (Y), and welcome.
cams and flywheel make a BIG difference in the cg.s (as will the other mods, no doubt) :)
 
Hi Frank, thanks for the warm and friendly welcome.
Not sure if i can ask a technical question here in
this forum.I can't wait to fit my Jun flywheel(4.3kg),
but need to know exactly what needs to be change.
Need help!
Thanks.
 
omsin

i think the jun will only suit the post 98 1.0 or any 1.3, did you have to fit your 1.0 flywheel and clutch to the 1.3 engine (like i had to) ?
 
Yes Frank. Is there a clutch kit that has a 16 splines and 180mm plate?
It will be good if there is and some $ saved!! If it cost too much to change
gearbox etc, i may have to sell the Jun flywheel.
 
omsin said:
Yes Frank. Is there a clutch kit that has a 16 splines and 180mm plate?
It will be good if there is and some $ saved!! If it cost too much to change
gearbox etc, i may have to sell the Jun flywheel.
Click to expand...

omsin

not that i know of, you drill and tap the f/w (to suit the early 1.0 clutch cover), but 100hp is the limit of a genuine nissan 1.0 plate (my exedy 1.0 plate slipped bigtime).
or (somehow) fit the 1.0 centre to a 1.3 plate.
the lighter 1.0 g/box seems to cope with 100hp no probs tho :)
 
Thanks Frank,
I'll check with my mechanic on your suggestion
and save my F/wheel!

Thanks again & bye for now.
 
Hi pjg, thanks for the warm welcome! Visited your blog sometime back.
Awesome car you got there!!! Mine is a BLUE too! Do you know how I can
post some photos here? Understand is different for guest.
 
Status
Not open for further replies.
Back
Top