Lost!!!

[CMF_Speedfreak]

Hi every1 just getting back into the micra since after i thinks it's been 5yrs ago.

I have a yellow k11 micra which i turbocharged back then which i nearly finished but give up due to time, work & family but want my toy back now. The has been dried stored on 4 axle stands & has not been turnover since.

I have a Vauxhall/Opel Zafira/OPC GSI turbo @ 242.5bhp & 291.9lbs torque which i drive plus been helping my mate with is renualt 5 gt turbo which is just over 300bhp in a 1.4 block & he keeps saying to get it fixed so im back now so im starting fresh.

This is what i have on the car so far...

Engine

Blue silicone pipes
Custom intercooler hard pipes
Custom standard manifold
2mm copper head gaskets custom made
Blitz bov
Hks mushroom filter
T25 turbocharged (blown)
Big front mount intercooler
Mitz evo motorsport walbro fuel pump
1600cc Nissan Pirmera injectors
5th Cosworth green injector
Ford Fiesta fuel regulator
Greddy e manage piggyback ecu
K&n breathers
Nismo radiator & oil caps

External

Whiteline lower strut brace
Omp upper strut brace
Whiteline front & rear uprated ant roll bars
Custom exhaust (which is crap)
PI springs & shocks
Custom bodykit (which is coming off)
Omp rollcage (powder coated blue)
Nissan Sunny GTIR grooved brakes & calipers
17" Team Dynamic Pro Race 1.2 light weight alloy wheels
Momo bucket seats
Omp steering wheel
Auto gauge gauges (air, oil pressure, oil temperature, boost, water, vacuum)
5" Auto gauge tacho meter
Auto meter air/fuel gauge
Custom short shifter
Totally striped out interior & roof lineing

What i have lying in the garage

Hks AIC
Kapattsu turbo gasket
2mm custom made copper head gasket
Hks springs
Koni shocks
Jun flywheel
Nissan Sunny 190mm clutch (I think)
Blown Skyline T25 turbo
Blown Renualt 5 turbo
15" OZ Super leggars light weight alloy wheels
Nissan Sunny GTIR brakes & calipers
Oem standard bits & pannels
Nissan Sunny GTIR injectors
Nissan Sunny GTIR intel

Cant remember anymore off the top of my head.

OK this what i think i need..

Forged pistons & rods
Uprated head bolts
AEM boost controler (got 1 on my other car brilliant! )
Hybrig T25/28/T3 turbocharger
Tubelar manifold
External wastegate
Bigger inlet/throttle body
Uprated oil pump

If any thinks I forgot anything please reply but can people but me in the right direction.

Many thanks looking forward to your replys

My goal is for fast, reliable power big power. 300bhp if i can i know its going to be hard but would be happy with 230-250bhp.

 

[CMF_Speedfreak]

More pics

 

[CMF_Speedfreak]

more pics

 

[CMF_frank2]

speedfreak

wow, that,s a humdinger i/c eh, you,ve got an impressive setup there.
i think most people go for head studs and nuts eh

frank

 

[CMF_turbo march-rolling shell]

you'll need some pretty fully hectic headporting + possibly bigger valves if that's the power figure your chasing, cams, valve springs, cam gears etc, a stand alone ecu and possibly a cdi unit. emanage just aint gonna cut it. keep an eye out for my car's power figures as my setup is kinda similarish to what you want but without the forged bottom end for now, should point you in the right direction.

 

[CMF_Pyro]

Wow, I think I still have some pics of your car lying around from back than, these engine bay pics look very familiar. Good to see you're continuing the project again.

 

[CMF_Speedfreak]

turbo march-rolling shell WROTE:

"you'll need some pretty fully hectic headporting + possibly bigger valves if that's the power figure your chasing, cams, valve springs, cam gears etc, a stand alone ecu and possibly a cdi unit. emanage just aint gonna cut it. keep an eye out for my car's power figures as my setup is kinda similarish to what you want but without the forged bottom end for now, should point you in the right direction.

Can you tell wheres the best places to get the parts from?

 

[CMF_frank2]

speedfreak

matt,s your man
http://www.humphrisoxford.co.uk/pdfs/10.04.08.pdf

frank

 

[CMF_sikK11]

That link would help if Matts site was back up and running but it is not. Anyone know what is happening with it wi wanna buy a few more parts.

 

[CMF_Speedfreak]

Is there anywhere else that i can get parts from little rusty at the moment.