K12 Heater blower not working on any setting .

[CMF_Dragonfly]

Anyone no what resistance readings i should get across the 4 contacts on a K12 Resister card . Mine is showing zero resistance across all contacts , has it shorted out .



Uploaded with ImageShack.us

 

[CMF_Dragonfly]

Eventually found the fault was the blower feed plug had lost its contact but here are some pictures of the tests i did .

















Couldnt find any fuses for the blowers in the engine compartment
but i did test the Battery + terminal fusable link wires for voltage
I believe the white wire from the fusable link is the Blower feed .