K11 rear brake shoes

[CMF_sva86]

Hello to you all.
Today i tried to change the brake shoes of my micra
but no luck.
Can some one give me some advice or something like a how-to.
http://desmond.imageshack.us/Himg38/scaled.php?server=38&filename=micraf.jpg&res=landing
Here is a digram of the shoe system if some one can tell in
what order i must disassemble the whole thing(1,3,6 etc.)

Thanks in advance

 

[CMF_frank2]

push againt 5 and twist a 1/4 turn, (both sides) then i usually pull the bottom of the shoe near 1

 

[CMF_sva86]

Do you remove the hub and the bearing like on the pic,or you can take them out without dismounting the bearing.
And did you remove the springs first,because i did not managed to take
spring No 3 out.I removed the 5 things that you said removed the other
two springs 2/4 but without,but even after that i could not take the shoe out.

 

[CMF_frank2]

its a lot easier with the hub off (just 1 very tight nut to remove eh)
and with the 2 x #5,s off you should be able to lift the whole assy off so that it all hangs on the cable

 

[CMF_sva86]

OK.
Thank for the help.
I will try again tomorrow.I tough that it will be quite easy if
the hub is removed,but i did not managed to unscrew the hub nut as well.