K10 - Headunit - What adapter do i need??

[Andy09]

This is my current stereo that is fitted:
http://andyz.co.uk/Micra/DSC00141.JPG
This is the back:
http://andyz.co.uk/Micra/DSC00142.JPG
Theese are the connectors that go into it:
http://andyz.co.uk/Micra/DSC00139.JPG

What would i need to purchase to make this fit a new standard headunit??
Or at least tell me what this connections/s are so i can search myself


Thanks
Andy

 

[jim_bling]

the links are bringing up the same pic mate of the front of the head unit

 

[Andy09]

images fixed, thanks for pointing that out,

 

[jim_bling]

so you are replacing the standard headunit for a aftermarket one you will need to buy an iso adaptor made for the k10

 

[ollyc98]

Or just cut and shut the wiring like I did, I bought a male ISO plug off ebay and got a tester and attached it, cheaper than the adaptor

 

[BG101]

Those connectors are the same as the ones used on the K11. The blank "socket" is where a connector would be for rear speakers, though the same adaptor lead will fit just minus the rear speaker plug. The existing aerial plug should fit most new head units.

I bought one for my K11 from here - it's the one at the bottom of the page (PC2-13-4).

I also bought an aerial plug adaptor as the socket on the original radio-cassette is the clip-on type with the centre pin.


BG

 

[joesouthgate]

God! Don't buy it from there, almost as much as a rip as halfords.
Got mine from ebay (£3 delivered)

 

[BG101]

I only got it from there because I was in a hurry (also wasn't 100% sure it would work in which case I could return it).

I put the pic up so people could see what it looked like


BG