K10 Cam reprofiling

[Ed]

Intake Open 16deg BTDC Close 58deg ABDC peak lift 8.75mm at 110deg ATDC
Exhaust Open 58deg BBDC Close 16deg ATDC peak lift 8.75mm at 110deg BTDC

Total duration intake/exhaust 254deg

Cost is £140 and I do this on an exchange basis, so I would need your original cam.

I can supply a cam for re-profiling to speed this up for a refundable £50 which you will get back once I have your cam on the condition that its suitable for the job.

Ed

 

[jamieccc]

hey ed! do you do reprofiling of other cams? such as a 1.2 litre nova?

 

[Ed]

Yes

 

[jamieccc]

nice touch i will get in contact with you then when the nova arrives:laugh:

 

[slyboogie]

what performance gains would this give me on an MA12? It'd be running alongside a 4-2-1 mani, straight through to backbox, and CBR600F carbs, With all that together what do you reckon i'd be looking at? These are all future mods but the sooner i get a job the sooner they happen =D

 

[daveeeeee]

what performance gain roughly are we looking at?

 

[Sri5]

Intake Open 16deg BTDC Close 58deg ABDC peak lift 8.75mm at 110deg ATDC
Exhaust Open 58deg BBDC Close 16deg ATDC peak lift 8.75mm at 110deg BTDC

Total duration intake/exhaust 254deg

Cost is £140 and I do this on an exchange basis, so I would need your original cam.

I can supply a cam for re-profiling to speed this up for a refundable £50 which you will get back once I have your cam on the condition that its suitable for the job.

Ed

Hi

Is this price inclusive of fitting?

 

[ollie240585]

Sri5, I know that Ed would charge an additional amount for fitting.

£140 for the cam re profiling is still a very good price.

 

[superls]

Intake Open 16deg BTDC Close 58deg ABDC peak lift 8.75mm at 110deg ATDC
Exhaust Open 58deg BBDC Close 16deg ATDC peak lift 8.75mm at 110deg BTDC

Total duration intake/exhaust 254deg

hi ed, how do these figures compare to the standard cam? how big or small are the gains of the new cam and is it just a case of fit it, time it up as usual and off you go or is there more to it?

sorry for the questions i just want to be sure before i buy one.

 

[whipit]

what time does your workshop shut on monday Ed? would like to drop my spare cam down to you, this be ok?