i want it to look ok ish to tho but if it comes it ill take that advice thanks frank , dont suppose you know the exact outlet diameter of the kp35 turbo i measure mine at roughly 30mm
ally pipes, silicone elbows and mikalor T-clamps from ebay.
selling my box full of em cos they're not suitable for prolonged high boost on trackdays, tended to pop apart,
Cheers guys and next one is alot of the ebay intercoolers are 57mm exits but the outlet for the tuby is about 30mm would i be better off using a couple of reducers or have a custom one made?
What stani said
Radiators are designed to send the water through each pipe to get maximum cooling effect on water.
Intercoolers use larger inner core pipes to allow air to flow faster. Thats why they're generally thicker too making em less resistant to flow
Though I have seen a heater matrix as an intercooler