Hub Help!

[Makrakin]

Hi, im currently in the process of having some spacers made up for my august micra k11 project, i need to know how many mm length the centre bore ring comes out from the hub, does any one have this info? Cheers

 

[Enuo]

Don't you have a hub to measure?

 

[Makrakin]

i dont no, i dont get the car untill august :S

 

[skymera]

I remember reading that someone used 8mm spacers to clear the hub.

What not get the centre bores milled out? It'd be cheaper

 

[h701micra]

I remember reading that someone used 8mm spacers to clear the hub

That'd be me

 

[Makrakin]

I remember reading that someone used 8mm spacers to clear the hub.

What not get the centre bores milled out? It'd be cheaper

Im actualy putting mini light wheels on with a 4x101.6 pcd, and centre bore 65.1 et7 but the wheels also need spacers to clear the calipers so im having some fabricated so that i dont have to use wobble nuts and the wheels will sit nicley on the new spigot from the spacer, i just need the length of the centre bore spigot to have these made up for me, use reckon its 8mm? regards Graeme

 

[h701micra]

I dont know if its exactly 8mm but I used that and it clears my hub spigot fine

 

[skymera]

Im actualy putting mini light wheels on with a 4x101.6 pcd, and centre bore 65.1 et7 but the wheels also need spacers to clear the calipers so im having some fabricated so that i dont have to use wobble nuts and the wheels will sit nicley on the new spigot from the spacer, i just need the length of the centre bore spigot to have these made up for me, use reckon its 8mm? regards Graeme

Hubcentric spacers?

 

[Makrakin]

Hubcentric spacers?

Exactly