head tightening torques

[welsh_micra]

im after the diagram and tightening torques for a 1.2 k10

i can find the thread on this anywhere

thanks scott

 

[Baz]

im after the diagram and tightening torques for a 1.2 k10

i can find the thread on this anywhere

thanks scott

You'll find all that in a haynes manual . . .head bolt tightening sequene and torques

 

[frank]

welsh_micra

2 stage
25 to 29 then 43 to 47 lbf, starting from the middle

 

[welsh_micra]

i dont have a haynes manual. has some1 got the sequence and what th e torque are in NM?

 

[frank]

welsh_micra

only got lbf or kgf m
sequence is,nt that important as long as you start in the middle and work outwards (either diagonal or circular will do) imo

 

[ollie240585]

lbf to NM

http://www.tiniusolsen.com/resource-center/lbf-n.html

 

[whipit]

welsh_micra

only got lbf or kgf m
sequence is,nt that important as long as you start in the middle and work outwards (either diagonal or circular will do) imo

Actually its extremely important if you dont want to snaap your head.

 

[joesouthgate]

yer if you dont do it properly you can destort your head! Ouch!