Head gasket tightening question

[Arkoudas94]

Hello everyone, I want to ask you if you tighten the the CG13DE head to the block following the manual's sequence (60 degrees final tightening)
or do you torque to a specific Nm final tightening? Thank you in advance.

 

[frank]

i always torqued to about 100nm
then undid half a turn, and re-torqued 1 bolt at a time (preferably the next day)
i found that the cg compound gasket compressed, and that the bolts would go another 1/8th turn at the same torque, if done 1 at a time