Engine Swap.

[willn]

Morning..

I need to swap from a 1.0 coil pack to a 1.0 dizzy engine...

Am I better off pulling the engine and box out the top or.. undoing top mounts, subframe etc and dropping the whole lot out the bottom?

Am I going to run into any problems swapping the two over or will it be pretty much plug and play? I'm going autograss set up with the wiring, so starter, ignition, fan etc will be on toggles so all the ecu needs to do is injection...

Thanks

Will.

 

[h701micra]

You'll need an dizzy ecu and loom too if I remember rightly

 

[willn]

Thanks,

I've got the entire car so thats not an issue.. Well I say not an issue I hate wiring and the dizzy car has nats which I've had run ins with before on my old 200sx's so woo hoo nats again... might pay someone to wire it up..