minisprite
Ex. Club Member
anyone give me a list of what I should do to get as much power out of a k11 1.0 as possible, I'm planning to take it down to fusion motorsport to get it remmaped!! cheers, Tom
best power from 1.0
- Thread starter minisprite
- Start date
minisprite
Ex. Club Member
the only thing I would be using it for is a couple of road rallies a year and a few autotests, so anything apart from forced induction.
minisprite
Ex. Club Member
LOL, cheers, any estimate of the power increase I could expect from that combined with a remap by Ed? where could I get the head skimmed and roughly how much would it cost? sorry for all the questions but I'm new to micras, spend most of my time messing with minis, they're a lot simpler. Cheers, Tom.
frank
Club Member
i started out on mini,s in the 70,s tom :laugh: (649 cam lcb 45 dcoe etc)
bagete,s blog will be an interesting read for you, and my 1.5mm headskim i had done today was £25 at midland reconditioning, autosprint does an excellent £80 260deg/10mm lift reprofile cam (but it very agressive and valvebounces @ 7.3k with stock springs, which is ok for a 1.3 but 1.0,s need more rpm) so piper inlet cam/cams ? (ok to 9k rpm)
bagete,s blog will be an interesting read for you, and my 1.5mm headskim i had done today was £25 at midland reconditioning, autosprint does an excellent £80 260deg/10mm lift reprofile cam (but it very agressive and valvebounces @ 7.3k with stock springs, which is ok for a 1.3 but 1.0,s need more rpm) so piper inlet cam/cams ? (ok to 9k rpm)
minisprite
Ex. Club Member
piper do an inlet cam for a micra? where can i get 1, and how much, sorry for being a pain, Thanks for your hep frank!!
frank
Club Member
they may only sell them in pairs tom, and they were £200 last time i looked
minisprite
Ex. Club Member
where could I buy a pair?
frank
Club Member
http://www.pipercams.co.uk/pipercams/www/product_search.php?search=micra&go.x=0&go.y=0
the ultimates, they,re an "advertised" 272 deg
