Enuo Glorified Electrician Feb 20, 2013 #1 Anyone know a source of 1.5" mild steel exhaust tubing? I'm looking at peeling the top off my back box, ripping out the baffles and tack welding a length of pipe in to connect the in to the out (stock looking straight through system lol).
Anyone know a source of 1.5" mild steel exhaust tubing? I'm looking at peeling the top off my back box, ripping out the baffles and tack welding a length of pipe in to connect the in to the out (stock looking straight through system lol).
superls K10 Tuner Feb 20, 2013 #2 most motorfactors can get exhaust tubing, made by either bosal or walker, fairly cheap to buy, but you will have to buy 2 or 3 meters, if you goto exhaust places they might let you rifle through there scrap bin for free or at worst a couple of quid
most motorfactors can get exhaust tubing, made by either bosal or walker, fairly cheap to buy, but you will have to buy 2 or 3 meters, if you goto exhaust places they might let you rifle through there scrap bin for free or at worst a couple of quid
skymera Brutal Honesty Feb 20, 2013 #4 Noddie said: I found these guys to be pretty cheap http://www.jetex.co.uk/ Click to expand... Damn, didn't even think of those guys! Local mate with an old Volvo made an entire system from those bits.
Noddie said: I found these guys to be pretty cheap http://www.jetex.co.uk/ Click to expand... Damn, didn't even think of those guys! Local mate with an old Volvo made an entire system from those bits.
OP OP Enuo Glorified Electrician Feb 21, 2013 #5 They don't go down to 1.5" though, they only do 1 3/4"
superls K10 Tuner Feb 21, 2013 #6 jetex seem very expensive compared with what i pay at motor factors