1.3 sr clocks 1.0

[tommicraz]

I wonder if u could help I have a 1996 1.0 micra an im wanting to put in 1.3 sr speedo clocks in
would this be ok or is the calibration going to be different? ie will the speedo show the correct speed?
I read somewhere its different anybody know?
thanks

 

[MicraPRO]

Should fit fine and all speedos are the same buddy just the rev counter you may have a problem with.

 

[MicraPRO]

Ive only ever fitted sr clocks into 1.3s so dont know if that will cause you an issue but theyve all been plug and play.

 

[tommicraz]

thanks! I know they will fit ok! I jst read someone had calibration issue, anyone fited any to a 1.0 and had isssue?

 

[McMicra]

Should fit fine and all speedos are the same buddy just the rev counter you may have a problem with.

Whats the prob with the rev counter?.

Do the 1.3s redline at the same as the 1.0s?

 

[tommicraz]

no jst wonder if they will be calibrated the same as 1.3 ie will they show the correct speed when fitted to a 1.o?
I read an old post from 2005 that reconed there be a 5mph difference.so wanted check if this is true before I buy them!

 

[karlj]

The gearing will be slightly different or at least they are with the k10's

 

[tommicraz]

in the clocks?

 

[karlj]

No the speedo drive, mechanically there is no differences between the clocks.

I had super s clocks in my 1.0 gx and never noticed any errors but back then I wasn't looking for them

 

[tommicraz]

ok so long as the clocks are the same mechanically then I think il be ok!?

 

[MicraPRO]

Whats the prob with the rev counter?.

Do the 1.3s redline at the same as the 1.0s?

There not all plug and play you may need to run a wire to the dizzy...

 

[McMicra]

ah fair enough, mines was plug and play .

I assume the redline stays the same between the 1.3s and 1.0s aye?

 

[karlj]

ah fair enough, mines was plug and play .

I assume the redline stays the same between the 1.3s and 1.0s aye?

No, I've heard the 1.0 has a higher rev range

 

[MicraPRO]

ah fair enough, mines was plug and play .

I assume the redline stays the same between the 1.3s and 1.0s aye?

I do believe so but frank or polly or any other guru on here will be able to help with that

 

[tommicraz]

im not to sure what u mean how does the rev range affect the speedo?

 

[tommicraz]

ive emailed frank so hopefully will here back from him soon if anyone else know pls let me know?

 

[McMicra]

No, I've heard the 1.0 has a higher rev range

Hmm interesting, @frank

Clocks I got were from a 1.3 I believe and they redline at 6.5krpm

 

[frank]

Hmm interesting, @frank

Clocks I got were from a 1.3 I believe and they redline at 6.5krpm

the 1.0 is capable of revving higher eh (shorter stroke)

 

[McMicra]

the 1.0 is capable of revving higher eh (shorter stroke)

Any idea to what RPM? as I said highest iv had it is 6.5 :L

 

[frank]

Any idea to what RPM? as I said highest iv had it is 6.5 :L

the limiter will kick in at about 6.9, but i bet it would stand 10k np

 

[McMicra]

the limiter will kick in at about 6.9, but i bet it would stand 10k np

haha cool cheers frank!

 

[Enuo]

Get an aftermarket bike tachometer and tell us what number it gets to before it pops?

 

[McMicra]

Get an aftermarket bike tachometer and tell us what number it gets to before it pops?

pops? .

pretty sure @IRNBROO had my car hit the limiter and the exhaust was popping

 

[Enuo]

pops? .

pretty sure @IRNBROO had my car hit the limiter and the exhaust was popping

Pops/explodes/detonates/violently self-dissasembles

 

[karlj]

Pops/explodes/detonates/violently self-dissasembles

That would require limiter removal

 

[Enuo]

And?

 

[karlj]

A very heavy right foot

 

[Enuo]

Rev limit removal is easy enough...

 

[karlj]

I know

 

[tommicraz]

it was more the speedo reading being accurate I wanted to know! rather than the accuracy of the rev/tacho.