WTB parts for convert a sr20 Di to De

[CMF_ToToL]

Needed:all intake stuff!anyone has a sr20Det to scrap lol

 

[CMF_Mimz]

Dont think you will have much luck with sr20 parts in this forum as 99.9% of people on here dont have sr20 in their micra. Try http://www.nissansilvia.com

 

[CMF_mycra]

SR20 blue top 379cc injectors, SR20 60/65/90mm Throttle-bodies, match ported inlet mani. pm me if your intrested

 

[CMF_ToToL]

Mimz,i'm trying to solve my conversion problem :my FWD sr20 singlepoint injection lying in a crush p10 primera, has to be fit in my k11 as a De!or vvl-DET-vvt! we just have a few silvia in Noumea,and the rwd engine has,for most of them,the low-port mani.i think it will hit the k11 firewall,so the silvia is not a good donor car except for the exhaust mani if i can go turbo.
Sr20 forums are not as complete as the micra one!

 

[CMF_Mimz]

Oh sick sr20 into micra...so how did u go with engine mounts setup? Pics? driveshafts?
cheers

 

[CMF_ToToL]

I'll see for the engine mounts,i want to put the engine in place to see the clearances and the water pump pulley issue.the driveshafts will be a mix of primera (in-box from the primera) and micra (wheel hub).
no pics at the moment i'v just starten the primera...3 fuses were missing.

 

[CMF_ToToL]

bump!as i was saying, the fuel pump fuse, and the ignition and ecu fuse were not on the car.i even manage to start the motor, poor idle and bad rev ving ,without any torque...but it start.just a shunt to put from power to black/red stripe wire to the pump (without this ans without the fuses, no gas go to the injector).