whats needed for my turbo setup

CMF_sarge3uk

» CMF Member
Member since:
Posts:
up to now ive got
1.6 throttle body and injectors
intercooler
fuel pressure regulator
apexi safc 2
manaul boost controller
t25 turbo
custom manifold
sump has been modified for return
intercooler piping kit
exhaust tubing

i no need these bits
oil feed
oil return
fuel pump
apexi setting up

comments very welcome
 

CMF_sarge3uk

» CMF Member
Member since:
Posts:
will do just having a problem with the apexi came to wire it up and it started and ran then cut out and wouldnt rev i think its something to do with the Air Flow Signal from AFM/Pressure Sensor can you help me on this

wanted to get it turbod this month but funds are running seriously low
 

CMF_sarge3uk

» CMF Member
Member since:
Posts:
yea ive done 5000 miles with them in and car runs perfect if not better

its just with the apexi it wouldnt rev and cuts out but starts back up runs for 30 seconds then dies its crazy
 

CMF_frank2

» CMF Member
Member since:
Posts:
sarge

it,s not the fuelpump relay cutting out because the you,ve redirected some of the ecu signal,s, is it ? (the relay has a dwell and cutout, if you switch the ignition on but dont start the engine eh)

frank
 
Back
Top