What you know

[Rob..]

Ok, so i started a new job 4 weeks ago as a camper-van fitter, makin come high spec models too. But today we were all told (even the supervisors) to write down a lsit of everything we know and have learned about the job, i've done absolutley loads this past month but im struggling to fill and A4 sheet "/

So i challenge you guys to make a list in about half an hour and tell me if you've put EVERYTHING down, because i can gurantee i'll walk in tomorrow and be told something obvious is missing.

 

[squarepants]

cheat lol

 

[SammoHung]

start by writing headings of subjects..then break down those subject areas into a few more subject areas when you ve got about 2 or 3 sets of subject areas...then start listing items under each of the lowest level subjects (a bit like the way the sub forums on this site are organised)

so may be something likeim guessing most of these for camper van fitting)

Utillities
-Electrix
-Plumming
-Gas

Fixtures & fittings
-upholstrey
-floor coverings
-windows
-Wall coverings

Structure
-weight limits
-reinforcements
-no-go areas for fixings
-corrosion

Time & number of people required to do certain jobs
-(may be list / repeat some of the above?)

Common pit-falls
-things that can catch people out during fitting and how to avoid

Hazards while working on a camper, health & safety precautions
-working inconfined sppaces
-personal protective equipment
-noise?
-flammable materials
-adhesive fumes & ventilation

any special tools or skills required

MOT
- drivers view
-

 

[Rob..]

Well sammohung thats actually helped alot. Thanks

Anybody else had a go? Its harder than it looks just looking at a blank sheet of paper.

 

[jamieccc]

start by writing headings of subjects..then break down those subject areas into a few more subject areas when you ve got about 2 or 3 sets of subject areas...then start listing items under each of the lowest level subjects (a bit like the way the sub forums on this site are organised)

so may be something likeim guessing most of these for camper van fitting)

Utillities
-Electrix
-Plumming
-Gas

Fixtures & fittings
-upholstrey
-floor coverings
-windows
-Wall coverings

Structure
-weight limits
-reinforcements
-no-go areas for fixings
-corrosion

Time & number of people required to do certain jobs
-(may be list / repeat some of the above?)

Common pit-falls
-things that can catch people out during fitting and how to avoid

Hazards while working on a camper, health & safety precautions
-working inconfined sppaces
-personal protective equipment
-noise?
-flammable materials
-adhesive fumes & ventilation

any special tools or skills required

MOT
- drivers view
-

ditch school because this bloke knows it all, just learn from the best