Wanted various K11 parts

[CMF_cuprotas]

Hi everyone,

wanted for my sprint micra project:

1. Gas dampers (front+rear);
2. 50 mm. lowering springs (Eibach?) for the dampers;
3. Suspension bushes front and rear;
4. Adjustable panhard rod on the rear axle;
5. Front and rear anti roll bars (whiteline or others);
6. Brake pads rear for standart calliper (mintex M1144, M1155 or Pagid RS19);
7. Brake discs rear, grooved and (or) drilled, not expensive;
8. Upper and lower strut braces;
9. performance camshafts;
10 Silicone hoses (air+coolant);
11. Helix clutch;
12. 14'' wheels;
13. Short shifter lever;
14. 5:1 ratio for gearbox

If you have anything cheap or second-hand, please write to me pm

 

[CMF_sportsclassic]

cuprotas WROTE:

"Hi everyone,<BR><BR>wanted for my sprint micra project:<BR><BR><BR><BR>1. Gas dampers (front+rear);<BR>2. 50 mm. lowering springs (Eibach?) for the dampers;<BR>3. Suspension bushes front and rear;<BR>4. Adjustable panhard rod on the rear axle;<BR>5. Front and rear anti roll bars (whiteline or others);<BR>6. Brake pads rear for standart calliper (mintex M1144, M1155 or Pagid RS19);<BR>7. Brake discs rear, grooved and (or) drilled, not expensive;<BR>8. Upper and lower strut braces;<BR>9. performance camshafts;<BR>10 Silicone hoses (air+coolant);<BR>11. Helix clutch;<BR>12. 14'' wheels;<BR>13. Short shifter lever;<BR>14. 5:1 ratio for gearbox<BR><BR>If you have anything cheap or second-hand, please write to me pm <BR>

Hi, have a look at www.humphrisoxford.co.uk

 

[CMF_nsm]

have a look at my nissan micra spare parts thread...