CMF_turbo march-rolling shell
» CMF Member
have a turbo manifold to suit the cg motor.. tis one me and a mate very dodgyly knocked up one night a couple of years or so ago. did the job, but nothing like my ussual work. comes with 3'' stainless dump pipe which goes from the turbo down to the sump, all this **** fits with p/s and ac with some slight persuasion of the a/c lines (i had an aftermarket type a/c system thou, but i imagine the genuine nissan type's aren't that different).. anywho, all subaru wrx turbo's will bolt straight on, td04l etc. you have to modify the actuator to miss the rad support thou. manifold never cracked (tis just normal 1 and a quarter inch mandrel bends in mild steel) not tuned length at all! basically the manifold consists of 2 flanges with pipes to join it all together. would be good for a very low budget turbo build. could even use without an i/c..(all the japs do). anyway, $100 for the dump +manifold. serious interested parties throw your email up and i'll organise pics
, see you then.