S SCOTTG200 Jan 4, 2009 #1 Just aquired a super s spoiler. Are these hard to fit (K11). Any tips on fitting? Cheers Scott
joesouthgate Super Moderator Moderator Club Member Jan 4, 2009 #2 you will need to drill to holes on the top of the boot to bolt it on then use something like tiger seal to fix the sides down.
you will need to drill to holes on the top of the boot to bolt it on then use something like tiger seal to fix the sides down.
OP OP S SCOTTG200 Aug 4, 2009 #3 Still have not fitted spoiler yet. Any north east peeps want to show me where drill holes need to be and position of spoiler when flush with tailgate? Cheers Scott
Still have not fitted spoiler yet. Any north east peeps want to show me where drill holes need to be and position of spoiler when flush with tailgate? Cheers Scott
pollyp Club Member Aug 4, 2009 #4 i dremelled the two bolt fixtures sticking out the spoiler and removed the clips on the side then i just carefully bonded the spoiler onto the boot using PU sealant gun and held on by masking tape overnight. next day i cleaned up the excess sealant.
i dremelled the two bolt fixtures sticking out the spoiler and removed the clips on the side then i just carefully bonded the spoiler onto the boot using PU sealant gun and held on by masking tape overnight. next day i cleaned up the excess sealant.
sr_steve Aug 4, 2009 #5 i found tiger seal excellent in the past. i think you can buy it form b and q
pollyp Club Member Aug 4, 2009 #6 i got my PU sealant from local Partco for bout £5. very tough stuff
