Running Lean

[Josh G]

i think my k10 it running lean,where on the carb is the air/fuel mixer? want to running it richer


cheers Josh

 

[wehey]

I have never seen a K10 carb but generally the mixture screw will only affect the mixture on tickover/idle

 

[h701micra]

On the back if I remember rightly. Need the funny snake tongue screwdriver to adjustment

 

[Josh G]

On the back if I remember rightly. Need the funny snake tongue screwdriver to adjustment

ok cheers where can i get one?

 

[Josh G]

ok cheers where can i get one?

and what size? (4mm,6mm,8mm,or 10mm) and when adjust you go out to make it richer?

cheers

 

[h701micra]

and what size? (4mm,6mm,8mm,or 10mm) and when adjust you go out to make it richer?

cheers

Easier to make one tbh
Screw out to lean it out
Screw in to richen it

 

[Josh G]

Easier to make one tbh
Screw out to lean it out
Screw in to richen it

thanks

 

[Josh G]

Easier to make one tbh
Screw out to lean it out
Screw in to richen it

cant find the on the carb have you got any photos?

 

[h701micra]

Should be in one of these 2 spots

 

[Josh G]

Should be in one of these 2 spots
View attachment 34630

My one is different :/

 

[Josh G]

Here's mine

 

[Josh G]

Side

 

[h701micra]

My arrows are wrong for a start, arrowed it as a GA carb
Anyway, its here

 

[Josh G]

O rite did look at this did try turning it in but dont do anything :/

 

[h701micra]

That's a protective cap, need the speacial 'fork'screwdriver to get in and make adjustments

 

[Josh G]

Iv got the tool but don't do anything :/

 

[h701micra]

You're not doing ot right then