how hard is doing this?

[Walter]

Next month finally i will install fresh SR20DE red top i rebuilt into my K11 1.0 , ive seen only 2 guys runing with oem micra speedometer/cluster, but rest of people adapt pulsar or another SR20 speedo/cluster, i want to keep interior oem look, my question is, how's hard to keep micra cluster and runing with SR20 properly? somebody have diagrams maybe?

Any input will be appreciate it a lot.

Thanks.

 

[Chogy]

Bump for interest.

 

[jacob_ts]

i cant see it making a difference, as the speedo is driven by the gearbox and fuel by tank sender its only the temp and the engine lights in which the temp gauge is just power ground and a signal wire from the sensor

 

[karlj]

It's knowing which wires go where and what not

Best asking Scott over on the AOC but I don't know his user name

 

[Walter]

Should be great they could help us explaining how to do that!!

 

[Chogy]

ive been told to change the whole engine loomb, and ecu and ignition

 

[Walter]

well, next month i will begin to swap a fresh sr20de i built into my K11, i have a whole 100nx wiring dont wanna remove all wiring from the car and install the other, just adapt the engine wiring/ecu to the rest of the car.

 

[superls]

it depends how good you are at wiring and understanding electrical drawings,

 

[Walter]

that's not problem, just i was trying to ask for some help about it, about diagram wiring and so..

 

[superls]

there is/was the k11 wiring diagrams around somewhere bioth pre and post NATS, i used to have them but have lost them,

 

[Walter]

if someone has it, let me know!.

100nx and primera use the same wiring?

Thanks

 

[superls]

a would suggest that most 2r20 engined cars (non turbo ones obv) share similar wiring engine wise

 

[superls]

sorry sr20*

 

[pollyp]

 

[Walter]

thanks for info Pollyp!