Fox racing R2 alloys BRAND NEW!

[curtis]

For sale:

Fox racing R2 alloys.

4 brand new tyres, brand new alloys.

Fitting kit included, about 24 nuts and spigot rings.

These do not fit the k10 hub, but need about 1.5mm taking out of the centre bore, costs from £20-£80 for the set of 4 depending on where you go for it.

http://www.motorspeed.com/store_mai...id=29&int_subcategory_id=0&int_product_id=946

link to a pic. Bare in mind these come with tyres!

15"

PCD = 100 (fits k10 and most other cars)

Cost me £350 about 1 month ago from halfords and have been sat in my room doing nothing.

My plans have totally changed for the car so need to sell quickly!

I will accept £300.

£30 delivery by courior. UK only.

thanks Curtis.

 

[curtis]

Pics:

 

[curtis]

BUMP these really need to sell!

OFFERS?!???

 

[jdmk11mike]

These do not fit the k10 hub

PCD = 100 (fits k10 and most other cars)

.

so they dont fit k10s then??? or do they??

 

[Robert]

They don't, but the PCD is right if you had the centres bored.

 

[curtis]

yes thank rob for clearing that

PCD is the distance between the nuts, The bore is about 1.5mm too small.

These are £300 on ebay without! tyres!

These need to sell before the end of JAN!!

 

[Turborevs]

hi curtis will these fit the new micra?

 

[curtis]

not sure m8, if they are bored out 1.5mm then they will fit lots of stuff, including the new micra. ill get the exact bore size now.

58.1mm, therefore they need about 1mm taken out!

 

[bobsp16]

they were vauxhall rim then,,,i use vx rim on my micra,sometime there is a steel ring inside the rim that you can knock out with a hammer or if not just die grind it bigger until it slide over the hub,,,i do

 

[jdmk11mike]

why didnt you just spend 350 notes on alloys that were gunna fit??? maybe a stupid question like but i dont think you will get a sale, you are wantin 300 quid for the alloys then if some one wants to put them on a k10 there going to have to pay another 100++ quid getting them bored out,sorry dude but id stick them on ebay as vauxhall corsa alloys ot whatever they actually do fit!!!

 

[curtis]

why didnt you just spend 350 notes on alloys that were gunna fit??? maybe a stupid question like but i dont think you will get a sale, you are wantin 300 quid for the alloys then if some one wants to put them on a k10 there going to have to pay another 100++ quid getting them bored out,sorry dude but id stick them on ebay as vauxhall corsa alloys ot whatever they actually do fit!!!

Boring then out wouldn't cost 100+ it would be very cheap if you went to the right place, as low as £20 for all 4!

And im not putting these on my car anymore so they are not needed!

I have got a Die grinder in the garage that i didn't know about so if anyone wants these i can make them fit the k10....

So THESE FIT A K10 now as i will be boring them out myself....

Price is the same!