FOR SALE: Hi-flowed and ported CG13DE

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Hi all,

It's been a while since I last posted here. I have for sale the CG13DE ported and hi-flowed head that I purchased off mighty who inturn had purchased it from cisco. There was a really good description of the head and photo's posted when it was for sale by mighty a while ago and is in the exact same condition as it was then, this head is still yet to be fitted to a micra since being hi-flowed. Mighty and cisco if either of you don't mind posting the description and or photos from the original post that would be much appreciated as that post has been wiped I think. The price of the head is $500 that is the price paid by mighty and the price I paid mighty, this includes postage, inside Australia. In case anyone is wondering my reason for sale is that I will no longer be going ahead with my N/A upgrades for my micra as I have purchased a 91 mr2gt turbo which will be seeing all of my modifications budget into the future. I haven't totally left the dark side I still have my micra and intend to keep it but 170rwkw of rear engine power was too much for me to resist. I am in melb and can arrange to meet up if some of you guys are down for the meet or are local.

Cheers ~~SME~~
 

CMF_Sean

» CMF Member
Member since:
Posts:
Don't make stupid offers Tom..

This thing is worth alot more than $500

Its frikking steal at $500

Sorry mate, but I couldn't find the photo's either. Perhaps Cisco has them lying around on his computer somewhere

Good luck with the sale (the other day I was cursing that I'd sold this but can't afford it now)

Sean
 

cisco

» CMF Member
Member since:
Posts:
The photos aren't very good, but they are on the site.

Since then, I cleaned up the head a lot before I sold it to mighty. There's a lot of dirt on it in this photo from being on the car.

It came off the blue monster when it had approx 130,000km on the clock, absolutely nothing wrong with it and working perfectly. The performance shop said the engine looked almost brand new inside when he saw all the parts.

And remember, the head was ported and cleaned up perfectly when the turbo conversion was done, so that means that the head has much less than 100,000km on it. The first owner had this car for a long long time before it was turbocharger.

Here they are:

<img src="/images/blue-monster/stripdown/head1.jpg" />

<img src="/images/blue-monster/stripdown/head2.jpg" />

<img src="/images/blue-monster/stripdown/head3.jpg" />

<img src="/images/blue-monster/stripdown/head4.jpg" />

 

cisco

» CMF Member
Member since:
Posts:
So you're up for the $500, but you're not :)

How convenient.
 

cisco

» CMF Member
Member since:
Posts:
I wish I could tell you Makes, because it was already on there when I got the car. So I don't have a before and after type comparison unfortunately.

However well flowed heads are a very valuable mod if you're planning other engine mods, i.e. other NA mods or a turbo conversion, then it really pays off.
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Yeh I have to say that I agree with mighty whole heartedly regarding the price. I bought the head for that price because I thought it was good value and will not part with it for any less than $500 particularly sinceI am not in a hurry to sell it, just selling it because I no longer want to modify my micra now that I have my mr2, p.s. if anyone in micra gets waved at by a red mr2 that's me! I still love driving my micra and will probably never part with it just doesn't seem worth it for the prices they are fetching at sale. Anyways before I got off topic, yeah $500 non-negotiable.
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Hi all,

Just giving this thread a bit of a BUMP! This item is still for sale at $500. By the way I saw a green micra with wheels and a big exhaust when I went to the gym in pascoe vale today, whoever that owner is NICE ride is it alpine micra perhaps not sure. Anyhow if you see me don't be shy to say hello i'm in either the light green micra with five spoke rims and 2inch exhaust tip or red mr2.

Cheers
galu
 

CMF_Tony

» CMF Member
Member since:
Posts:
Anybody thinking of purchasing the twin cam head it is a very good price, I had the head on my Mazda Familia 4wd turbo ported and polished and from memory it was around $700-900 to get done.

JHH Engeneering in Brisbane did the work and where very good to deal with.
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
A ported and hi-flowed head is baiscally a head which has had the cylinder heads ported, i.e. the pathways where the air runs are bigger than stock, resulting in them being able to hold a greater volume of air if you imagine how much water you could fit in a certain diameter pipe then you increase the radius of the inside of the pipe you can hold more water. The volume is only one consideration however. The other thing that head porting aims to rectify is air velocity through the head. The amount of air available is determined also by how quickly it is able to pass through the pathway it travels to the cylinder, to achieve this your aim must be to make the airflow through the cylinder head as smooth as possible, that is to say air turbulence is a bad thing. Turbulance in the airflow can be caused in the sand casting process when the head is made. When it is cast at the factory the port might have surface defects and roughness which cause turbulent airflow, making from a slower air velocity. Head porting aims to elemiante this factor. Additionally and I know this is dragging on a bit now but I also believe in some porting the actual shape of the path travelled is actually changed to allow for the most streamlined and direct flow of air into the cylinder allowing for a better airflow once again.

The additional airflow is beneficial because the more air you provide the engine with the more fuel you add to the mixture the greater the combustion, the greater the combustion the faster you go in your micra, the faster your micra goes the more commodores you can tick off!

Head working is beneficial to both n/a and forced induction cars however I believe the benefits may be more pronounced in a n/a setup because with forced induction you are increasing air speed by forcing air flow with a turbo or supercharger, but i'm not 100% sure if this is true.

From my research this is the best answer I can give you, I don't know if I have all the concepts 100% percent correct and anyone feel free to correct me if i've got something wrong, i'm not a professional just an enthusiast.

Cheers
 

CMF_Urban

» CMF Member
Member since:
Posts:
Okay thanks. That's what i "thought" it was, but wasn't to sure so was just checking.

I might be interested if you still have it in a few weeks if it is still for sale.

Do you have any idea what postage would cost? (A rough idea?) to Newcasltle in NSW?

Thanks, Cameron.
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Yes I am willing and able to post it to you. I don't think that it is much as mighty posted it to me with postage inclusive in the price so I will do the same for you. I have stated previously that I am in no hurry to sell this item thats one of the reasons I wasn't negotiating the price so a couple of weeks will be fine.
 

CMF_daily_ricer

» CMF Member
Member since:
Posts:
Sorry to jump in on you Urban, but I also am pretty interested, I'm out of the country and havn't had too much time to check the site regularly. I dont want to pinch it from you if you are a definate but are needing time to get some money together. I have had this happen to me and it gave me the ****s. Let us know either way.

~~SME~~, have you got any recent pics of it as it is now? I have the understaning the ones currently on this post are from before you had it and that the head has since been cleaned up a bit. I'll send you an email so that you have a direct way of contacting me if you do.

Cheers,
Tom
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Tom

E-mail recieved I will try to add the pics to this thread when I get a chance to take some photos (next couple of days).

Urban you still have first dibs on the head but I would need to know definitely that you are going to buy the head.

Cheers John.
 

CMF_Urban

» CMF Member
Member since:
Posts:
I'm not here to stop a sale.

If daily ricer wants to buy it, go for it.

I'll message you when i have the money, to see if you still have it or not.

If you don't well then that's my bad luck. lol.

Good luck with the sale.

Cameron.
 

Deleted User

» CMF Member
so it still uses the stock vales,springs and stuff. and just to be clear does it also come with the inlet manafold and plenum, if not it makes it head to justify because u will need to match port same goes for exhaust manifold(extractors or turbo manifold, but not as imporant as inlet)

and i guess im always worryed about the reason for sale your is very clear but not sure about others
 

CMF_Sean

» CMF Member
Member since:
Posts:
POL,

They do it in the interest of emissions regulations, fuel consumption and drivability on the street. The engines are made extrememle conservative.

Now please keep it on topic

Sean
 

CMF_NotAnotherSSS

» CMF Member
Member since:
Posts:
unless someone can give a picture of a stock cg13de head, i dont think many people will be able to tell you from just looking at it.

Mabye send a pic of it to Errol at datrats? He seems to be a walking Google.com of the CG series engines. :p
 

CMF_Sean

» CMF Member
Member since:
Posts:
Blake:

Yes it uses stock valves, springs and retainers. The only modifications to this head have been in the intake and exhaust ports... And the porting is very good

Sean
 

CMF_Urban

» CMF Member
Member since:
Posts:
I have one more question...

If you had this head put on, Would you need to change A/F or something?

Or do you run it stock?

Thanks, Cameron.

Btw - At $330... lol.

$170 to go! *fingers crossed it hasn't been sold*
 

CMF_~~SME~~

» CMF Member
Member since:
Posts:
Hi all

Just posting an update. Daily_ricer has just contacted me via email today to let me know that he is backing out of the purchase for the head. So this means that the head is still on the market and available, (Urban). BUMP

John
 
You must log in or register to reply here.

Similar threads

C
FOR SALE: Hi-flowed and ported CG13DE
Replies
16
Views
188
CMF_fred
C
C
cg13de engine and new parts for sale
Replies
0
Views
128
CMF_barney
C
C
mighty cg13de for definate sale
2
Replies
64
Views
720
CMF_Alex_B
C
C
EOI: Jap CG13DE (Brisbane)
Replies
5
Views
207
CMF_S2000
C
C
T25 for sale
Replies
9
Views
160
CMF_1300cc
C
Back
Top