Fitting 100NX brakes to K11

[Bryn7]

Hi to you all. This is my first post since joining MSC forum
My grandson rallies a Micra K11 1.0 ltr car which we are upgrading to a 1.4 for this season. this will require an upgrade of the brakes and it appears that the 100NX brakes will fit. Can anyone tell me if any special caliper mounting brackets will be required to make them fit the K11.
Looking forward to your advice

 

[Craig]

You will need a small shim (1 or 2mm IIRC) to move the caliper out, other than thet, they are straight swap. You may get some slight rubbing on the outside edge of the disk, but I never had that problem.

I have a set of (March ST) calipers and the 100NX disks that I need rid of if you're interested?

Ta

 

[Bryn7]

Thank you Craig. One thought has just come up; are the 100NX discs OK with 13" alloy wheels? We will give some thought to your offer

 

[karlj]

I've been running 100nx without the need for shims with 13" steels, haven't had any problems yet